反应 #927256

反应方程式

2-bromo-3-hexyloxypropene

potassium hydroxide

bromoform

→

1,1,2-tribromo-2-(hexyloxymethyl)cyclopropane

收率 87.0%

溶剂

methylene chloride

反应条件

后处理

1. 1
   其他the reaction mixture was transferred to a separatory funnel
2. 2
   洗涤washed with water
3. 3
   其他The methylene chloride phase was transferred to a flask
4. 4
   workup.ADDITIONtreated with the same amount of the phase transfer catalyst and 45% potassium hydroxide
5. 5
   workup.STIRRINGstirred at room temperature for an additional 3 days
6. 6
   workup.STIRRINGthe reaction was stirred one more day at room temperature
7. 7
   洗涤The reaction mixture was washed with water
8. 8
   干燥the methylene chloride phase was dried with magnesium sulfate
9. 9
   其他The product was chromatographed on silica gel with 20% ethyl acetate 80% hexane

实验过程

A mixture of 5.9 g of 2-bromo-3-hexyloxypropene(26.7 mmol), 2.05 g of N,N′-dibenzyl-ethane-1,2-bis-(diethylammonium bromide), 10.5 g of 45% potassium hydroxide (84 mmol), 23.3 g of bromoform (92 mmol) and 70 g of methylene chloride were rapidly stirred at room temperature for two days. When the reaction stalled, the reaction mixture was transferred to a separatory funnel and washed with water. The methylene chloride phase was transferred to a flask and treated with the same amount of the phase transfer catalyst and 45% potassium hydroxide, then stirred at room temperature for an additional 3 days. The workup-recharge sequence was repeated once more, and the reaction was stirred one more day at room temperature. The reaction mixture was washed with water, the methylene chloride phase was dried with magnesium sulfate, and then stripped. The product was chromatographed on silica gel with 20% ethyl acetate 80% hexane to give 1.35 g of 87% pure 1,1,2-tribromo-2-(hexyloxymethyl)cyclopropane.

来源