反应 #62971
ord-5733ca0c4a0b4a5f83561b164b87ae07
反应方程式
反应物
试剂
反应条件
后处理
- 1其他The aqueous layer was removed
- 2萃取the organic layer was extracted with water (2×100 ml)
- 3workup.ADDITIONTo the combined aqueous solutions was added, at -5° C.
- 4其他a premixed solution prepared from 59.25 g of potassium permanganate, 18 ml of concentrated phosphoric acid and 600 ml of water, until the pink color of the permanganate
- 5workup.ADDITIONThe addition
- 6其他the two phases were separated
- 7萃取The aqueous solution was extracted with additional ethyl acetate (2×150 ml)
- 8洗涤the combined ethyl acetate solutions were washed with brine
- 9干燥dried (MgSO4)
实验过程
To the dichloromethane solution of 6,6-dibromopenicillanic acid from Preparation A was added 300 ml of water, followed by the dropwise addition over a period of 30 minutes of 105 ml of 3N sodium hydroxide. The pH stabilized at 7.0. The aqueous layer was removed and the organic layer was extracted with water (2×100 ml). To the combined aqueous solutions was added, at -5° C., a premixed solution prepared from 59.25 g of potassium permanganate, 18 ml of concentrated phosphoric acid and 600 ml of water, until the pink color of the permanganate persisted. The addition took 50 minutes and 550 ml of oxidant were required. At this point 500 ml of ethyl acetate was added and then the pH was lowered to 1.23 by the addition of 105 ml of 6N hydrochloric acid. Then 250 ml of 1M sodium bisulfite was added during 10-15 minutes at ca. 10° C. During the addition of the sodium bisulfite solution the pH was maintained at 1.25 -1.35 using 6N hydrochloric acid. The aqueous phase was saturated with sodium chloride and the two phases were separated. The aqueous solution was extracted with additional ethyl acetate (2×150 ml) and the combined ethyl acetate solutions were washed with brine and dried (MgSO4). This afforded an ethyl acetate solution of 6,6-dibromopenicillanic acid 1,1-dioxide