反应 #4941

反应方程式

2-(2-chloroethyl)-2,3-dihydro-4-methylpyrido[3,2-f][1,4]oxazepine-5(4H)-thione

N-methylaniline

N-methylaniline

→

2,3-Dihydro-4-methyl-2-[2-(methylphenylamino)ethyl]pyrido[3,2-f][1,4]oxazepin-5(4H)-thione

溶剂

toluene

反应条件

后处理

1. 1
   温度the mixture heated
2. 2
   温度to reflux
3. 3
   其他Toluene was removed by rotary evaporation (90° C., water aspirator)
4. 4
   其他The N-methylaniline was removed also by rotary evaporation (90° C., vacuum pump)
5. 5
   洗涤washed with 3×30 ml dilute aqueous sodium hydroxide
6. 6
   干燥The organic layer was dried over anhydrous sodium sulfate
7. 7
   过滤filtered
8. 8
   浓缩concentrated by rotary evaporation (80° C., water aspirator)
9. 9
   其他More N-methylaniline was removed with the vacuum pump at 90° C. for several hours
10. 10
    workup.ADDITIONTo the residue was added 150 ml of ethyl acetate at which point some product
11. 11
    其他crystallized out
12. 12
    洗涤eluting with 60% hexane/40% ethyl acetate
13. 13
    浓缩After concentrating the flasks
14. 14
    workup.ADDITIONcontaining
15. 15
    其他the product, crystallization
16. 16
    其他The chromatographed product was recrystallized from ethyl acetate/isopropyl alcohol
17. 17
    其他Approximately 2 g additional was collected by recrystallization of crude product, m.p. 163°-4° C

实验过程

To a suspension of 2-(2-chloroethyl)-2,3-dihydro-4-methylpyrido[3,2-f][1,4]oxazepine-5(4H)-thione in 100 ml of toluene was added 11.49 g (0.11 mole) N-methylaniline and the mixture heated to reflux with stirring for 2 days (after approx. 6 hr, 23.0 g (0.22 mole) additional N-methylaniline was added). Toluene was removed by rotary evaporation (90° C., water aspirator). The N-methylaniline was removed also by rotary evaporation (90° C., vacuum pump). The residue was taken up in 100 ml of chloroform and washed with 3×30 ml dilute aqueous sodium hydroxide. The organic layer was dried over anhydrous sodium sulfate, filtered and concentrated by rotary evaporation (80° C., water aspirator). More N-methylaniline was removed with the vacuum pump at 90° C. for several hours. To the residue was added 150 ml of ethyl acetate at which point some product crystallized out. However, since much remained in solution, preparative HPLC on a silica gel column eluting with 60% hexane/40% ethyl acetate was effected. After concentrating the flasks containing the product, crystallization was effected induced by seeding. The chromatographed product was recrystallized from ethyl acetate/isopropyl alcohol and amounted to 1.1 g m.p. 164°-5° C. Approximately 2 g additional was collected by recrystallization of crude product, m.p. 163°-4° C. The combined yield was 3.1 g (26%).

来源