反应 #446435

反应方程式

sodium hydroxide

ammonium peroxodisulfate

1-(2,2-dimethylindan-1-yl)-5-imidazolecarboxylic acid methyl ester

sulfuric acid

→

1-(2,2-dimethyl-3-oxoindan-1-yl)-5-imidazolecarboxylic acid methyl ester

收率 60.2%

溶剂

water

反应条件

后处理

1. 1
   温度is heated to +80° C
2. 2
   温度the solution is cooled to +7° C.
3. 3
   萃取The solution is extracted twice
4. 4
   干燥the organic phase is dried over sodium sulfate
5. 5
   浓缩concentrated to dryness by evaporation
6. 6
   workup.ADDITIONis added
7. 7
   过滤The resulting suspension is filtered
8. 8
   浓缩the filtrate is concentrated by evaporation
9. 9
   其他the residue is crystallised from an ether/hexane mixture

实验过程

A mixture of 30.0 g of 1-(2,2-dimethylindan-1-yl)-5-imidazolecarboxylic acid methyl ester, 150 ml of water and 17 g of sulfuric acid is heated to +80° C. Within a period of 1.5 hours a solution of 114 g of ammonium peroxodisulfate is added dropwise thereto. When the reaction is complete, the solution is cooled to +7° C. and adjusted to pH 3 by the addition of 30% sodium hydroxide solution. The solution is extracted twice using 200 ml of methylene chloride each time, and the organic phase is dried over sodium sulfate and concentrated to dryness by evaporation. The residue is taken up in a small amount of methylene chloride, and ether is added. The resulting suspension is filtered, the filtrate is concentrated by evaporation and the residue is crystallised from an ether/hexane mixture. 19 g of 1-(2,2-dimethyl-3-oxoindan-1-yl)-5-imidazolecarboxylic acid methyl ester having a melting point of 104°-108° C. are obtained.

来源