反应 #3160
ord-bcf47efb084b407da3df0c21bd581e1b
反应方程式
反应条件
后处理
- 1其他nitrogen atmosphere on a dry ice-acetone bath at an inner temperature of -70° to -68° C., followed
- 2workup.STIRRINGby stirring for 50 minutes at the same temperature
- 3workup.STIRRINGby stirring for minutes at the same temperature
- 4其他Thereafter, the cooling bath was removed
- 5workup.ADDITIONfollowed by gradual addition of 9.5 ml of 10%-hydrochloric acid
- 6其他After the reaction
- 7萃取subjected to extraction with isopropyl ether
- 8洗涤by washing with water
- 9干燥drying with mirabilite and distilling-off of the solvent
- 10其他to obtain a residue
- 11workup.WAITthe mixture was left
- 12其他to precipitate a crystal
- 13过滤The crystal was recovered by filtration
实验过程
Then, 2.00 g (6.43 mM) of b-bromo-2-octylcoumaran and 28 ml of dry THF were placed in a 100 ml-three-necked flask. To the mixture, 4.5 ml (7.20 mM) of a 1.6M solution of butyllithium in hexane was added dropwise under stirring and nitrogen atmosphere on a dry ice-acetone bath at an inner temperature of -70° to -68° C., followed by stirring for 50 minutes at the same temperature. To the resultant mixture a solution of 3.2 ml (13.9 mM) of triisopropylborate in 5.7 ml of dry THF was added dropwise in 10 minutes at an inner temperature of -73° to -68° C., followed by stirring for minutes at the same temperature. Thereafter, the cooling bath was removed and the inner temperature was increased to room temperature, followed by gradual addition of 9.5 ml of 10%-hydrochloric acid. After the reaction, the reaction mixture was poured into water and subjected to extraction with isopropyl ether, followed by washing with water, drying with mirabilite and distilling-off of the solvent to obtain a residue. To the residue, hexane was added and the mixture was left standing in a freezer to precipitate a crystal. The crystal was recovered by filtration to obtain 1.19 g of 2-octylcoumaran-5-boronic acid (Yield: 67.1%).