反应 #1929005

ord-1235eb39cdd040e7ac168dfbf1d7cca8

反应方程式

OCCCCCCCCCl
8-chloro-1-octanol
c1ccncc1
pyridine
O=S(Cl)Cl
SOCl2
CCCCCCCCCl
Polymer 9
收率 95.0%
CCCCCCCCCl
Chlorooctane
收率 95.0%

溶剂

反应条件

温度
60°CELSIUS
详细条件
See reaction.notes.procedure_details.

后处理

  1. 1
    其他The Schlenk was connected to a trap with a NaOH solution (2M) for absorption of HCl and SO2
  2. 2
    温度The temperature was slowly increased
  3. 3
    workup.DISTILLATIONExcess of SOCl2 and THF were distilled off under vacuum at 50° C. for 30 minutes
  4. 4
    workup.ADDITIONThen freshly distilled THF (30 ml) was added
  5. 5
    workup.DISSOLUTIONto dissolve the acylated polymer
  6. 6
    workup.DISSOLUTIONAfter 30 minutes needed for complete dissolution of polymer
  7. 7
    其他The polymer was recovered
  8. 8
    其他by precipitating
  9. 9
    workup.DISTILLATIONinto distilled water
  10. 10
    其他The product purification
  11. 11
    workup.DISSOLUTIONwas made by dissolution in hot CH2Cl2
  12. 12
    其他precipitation in ethanol
  13. 13
    其他drying at 50° C. in vacuum oven

实验过程

1 g (0.0015 mol, equivalent weight=666 gram per mole repeat unit) polymer 5 was placed into a 50 ml Schlenk and dissolved in THF anhydrous (30 ml). The Schlenk was connected to a trap with a NaOH solution (2M) for absorption of HCl and SO2. Then pyridine anhydrous 0.5 ml (0.0062 mol), and SOCl2 0.3 ml (0.0041 mol) were added dropwise at room temperature into the Schlenk. The temperature was slowly increased and maintained at 60° C. for 3 h. Excess of SOCl2 and THF were distilled off under vacuum at 50° C. for 30 minutes, the resulting crude acid chloride polymer. Then freshly distilled THF (30 ml) was added to dissolve the acylated polymer. After 30 minutes needed for complete dissolution of polymer, a solution of excess 8-chloro-1-octanol 1.05 ml (2 mol.eq, 0.0062 mol) was added dropwise to the polymer solution at room temperature under vigorous stirring, and allowed to stir for 24 h. The polymer was recovered by precipitating into distilled water. The product purification was made by dissolution in hot CH2Cl2, precipitation in ethanol and drying at 50° C. in vacuum oven to obtain Polymer 9 as a brown solid (1.39 g, yield 95%) with the following characteristics:

来源

DOI: 10.6084/m9.figshare.5104873.v1专利: US08944257B2uspto-grants-2015_02