反应 #1483028

反应方程式

acetic anhydride

toluene

sulfuric acid

acetic anhydride

3,5-dichlorosalicylic acid

→

2-acetoxy-3,5-dichlorobenzoic acid

收率 82.7%

溶剂

water

反应条件

后处理

1. 1
   其他A 1 L, round-bottom, three neck flask equipped with: a mechanical stirrer
2. 2
   其他was placed in a water bath
3. 3
   workup.ADDITIONThe following reagents were subsequently charged to the flask with
4. 4
   其他reached 60° C.
5. 5
   温度maintained at 65° C.)
6. 6
   其他to exceed 75° C
7. 7
   workup.ADDITIONthe addition
8. 8
   workup.STIRRINGthe mixture was stirred
9. 9
   温度heated to 70° C. for another 4 h
10. 10
    温度the mixture cooled over night to room temperature
11. 11
    其他The white crystals that separated from the mixture
12. 12
    过滤were filtered off
13. 13
    洗涤washed with 2×10 mL of ice-cold toluene and vacuum
14. 14
    其他dried at 50° C.

实验过程

A 1 L, round-bottom, three neck flask equipped with: a mechanical stirrer, a thermometer and a 125 mL dropping funnel with pressure equilibration was placed in a water bath maintained at 65° C. The following reagents were subsequently charged to the flask with an efficient stirring: 250 mL of dry toluene, 2.5 mL of concentrated sulfuric acid and 207 g of well ground, solid 3,5-dichlorosalicylic acid, which forms a mobile suspension. When the temperature of this constantly stirred mixture reached 60° C. (with the water bath temperature maintained at 65° C.) a drop-wise addition of 108 g (100 mL) of acetic anhydride was initiated and completed within 30 min. During the acetic anhydride addition the temperature of the reaction mixture was not allowed to exceed 75° C. After completing the addition, the mixture was stirred and heated to 70° C. for another 4 h. After this time, the agitation was stopped and the mixture cooled over night to room temperature. The white crystals that separated from the mixture were filtered off, washed with 2×10 mL of ice-cold toluene and vacuum dried at 50° C. to yield 206 g (82.7% yield) of 2-acetoxy-3,5-dichlorobenzoic acid. An additional 30.6 g (12.3%% yield) of the product was recovered by: concentrating the filtrate to ½ of the original volume, cooling the solution in an ice-water bath, filtering off the crystalline product and vacuum drying it at 50° C.

来源