反应 #1148660

反应方程式

bis(triethoxysilyl)methane

BTM

t-butyllithium

→

[bis(triethoxysilyl)methyl]lithium

反应条件

后处理

1. 1
   workup.DISTILLATIONTo 300 mL of freshly distilled dry tetrahydrofuran (THF) in a 3-neck flask
2. 2
   其他the solution was flushed for 5 minutes with nitrogen that
3. 3
   其他resulted
4. 4
   温度Then the temperature of the solution was raised to room temperature (RT)
5. 5
   workup.STIRRINGstirring
6. 6
   workup.WAITcontinued for 30 minutes at RT

实验过程

A commercially available bis(triethoxysilyl)methane (BTM) was lithiated by the following procedure. To 300 mL of freshly distilled dry tetrahydrofuran (THF) in a 3-neck flask attached to a bubbler was added 3.07 g (9.00 mmol) BTM and the solution was flushed for 5 minutes with nitrogen that had been passed through a drying column packed with CaCl2 and Drierite. The solution was cooled down to −78° C. and then 5.2 mL, 1.7 M (9 mmol) of t-butyllithium was added dropwise over 10 minutes. The solution was stirred for 30 minutes at −78° C. after which a very, faint yellowish solution resulted. Then the temperature of the solution was raised to room temperature (RT) and stirring continued for 30 minutes at RT after which the solution turned colorless.

来源