Реакция #59836
ord-bab819af325c4484a9d9b1d99e079973
Уравнение реакции
Реактанты
Реагенты
Растворители
Условия реакции
Обработка
- 1Другоеequipped
- 2Температураwith cooling pipe
- 3ДругоеAfter the reaction terminated
- 4workup.ADDITIONadding dilute hydrochloric acid in an amount of 100 milliliter into the reacted solution
- 5Другоеan organic layer was separated
- 6Промывкаwashed with the use of sodium bicarbonate solution and sodium chloride solution
- 7Сушкаby drying with the use of magnesium sulfate
- 8ДругоеAfter removing the solvent
- 9workup.DISTILLATIONby distillation
- 10Другоеby means of a rotary evaporator
Методика
Under an atmospheric argon gas flow, trifluoromethane sulfonic acid-6-bromo-2-naphthyl ester in an amount of 32 g (90 mmol), dichloro(diphenylphosphinoferrocene)palladium in an amount of 3.6 g (5% by mol), lithium bromide in an amount of 7.8 g (90 mmol) and desiccated tetrahydrofuran in an amount of 100 milliliter were placed into three necked-flask equipped with cooling pipe and having a capacity of 500 milliliter, and then, the resultant solution was cooled down to −20° C. After slowly dripping isopropylmagnesiumbromide in an amount of 90 milliliter (90 mmol, 1 mol/liter (tetrahydrofuran)) into the flask, the resultant solution was stirred under heating at the temperature of 80° C. for 4 hours. After the reaction terminated, adding dilute hydrochloric acid in an amount of 100 milliliter into the reacted solution, an organic layer was separated and washed with the use of sodium bicarbonate solution and sodium chloride solution, followed by drying with the use of magnesium sulfate. After removing the solvent by distillation by means of a rotary evaporator, the resultant crude product was refined by means of column chromatography (silicagel, hexane/dichloromethane=90/10), and as a result, 9.4 g of aimed compound (white crystal) was obtained (yield: 33%).