Реакция #1973970

Уравнение реакции

2-bromo-1-methoxy-4-nitrobenzene

sodium 2,2,3,3,3-pentafluoropropanoate

→

1-methoxy-4-nitro-2-(perfluoroethyl)benzene

Растворители

DMF

toluene

Условия реакции

Обработка

1. 1
   Другоеto give a tan suspension
2. 2
   Другоеtoluene was removed by a Dean-Stark trap
3. 3
   ТемператураThe mixture was heated at 155° C. for 6 h under nitrogen
4. 4
   Температураcooled
5. 5
   workup.ADDITIONpoured into 100 mL of water and 100 mL of ether
6. 6
   Фильтрацияfiltered through a 1-inch plug of Celite
7. 7
   Промывкаthe plug was rinsed with ether
8. 8
   ДругоеThe filtrate layers were separated
9. 9
   ПромывкаThe organic layer was washed with brine
10. 10
    Сушкаdried (Na2SO4)
11. 11
    Фильтрацияfiltered
12. 12
    Концентрированиеconcentrated
13. 13
    Другоеchromatographed on an Isco 40 g silica cartridge
14. 14
    Промывкаeluting with 4:1 hexane/EtOAc
15. 15
    Другоеto give a yellow oil that
16. 16
    workup.ADDITIONmix of desired material

Методика

To a 250 mL round-bottom flask was added 2-bromo-1-methoxy-4-nitrobenzene (3.5 g, 15.08 mmol), copper(I) iodide (5.75 g, 30.2 mmol), and sodium 2,2,3,3,3-pentafluoropropanoate (5.25 g, 28.2 mmol) in DMF (75 ml) and toluene (25 ml) to give a tan suspension. The mixture was heated at 150° C. and toluene was removed by a Dean-Stark trap. The mixture was heated at 155° C. for 6 h under nitrogen, cooled and poured into 100 mL of water and 100 mL of ether, filtered through a 1-inch plug of Celite and the plug was rinsed with ether. The filtrate layers were separated. The organic layer was washed with brine, dried (Na2SO4) filtered and concentrated. The dark oil was flash chromatographed on an Isco 40 g silica cartridge eluting with 4:1 hexane/EtOAc to give a yellow oil that was a (3:1) mix of desired material and starting material (1.5 g, 37%).

Источник