Реакция #162560

ord-2b203e2493dd4f60bd4c9e3ec412b024

Растворители

Условия реакции

Температура
97.5°CELSIUS
Подробные условия
See reaction.notes.procedure_details.

Обработка

  1. 1
    ДругоеA 3 L three-necked round bottom flask equipped with an overhead stirrer, nitrogen inlet
  2. 2
    Температураto cool to rt overnight
  3. 3
    ТемператураAfter this time the reaction was heated to an internal temperature of 100° C.
  4. 4
    Температураcooled to an internal temperature of 50° C
  5. 5
    Температураto cool to rt
  6. 6
    ПромывкаThe resulting solution was washed with water (3×1 L), 10 wt % aq. NaHSO4 (4×1 L) and brine (1×500 mL)
  7. 7
    СушкаThe separated organic layer was dried over MgSO4
  8. 8
    Фильтрацияfiltered
  9. 9
    Концентрированиеconcentrated in vacuo
  10. 10
    Другоеevaporated in vacuo
  11. 11
    Другоеdried under high vacuum for 36 h
  12. 12
    Другое(247 g of crude material was obtained)
  13. 13
    Фильтрацияfiltered
  14. 14
    Промывкаwashed with a 10 wt % aqueous NaHSO4 solution (4×1 L)
  15. 15
    Другоеto form in the EtOAc layer
  16. 16
    workup.ADDITIONA magnetic stir bar was added
  17. 17
    Другоеdried on a glass
  18. 18
    Фильтрацияfilter under a stream of nitrogen for two days
  19. 19
    workup.ADDITIONsaturated aqueous NaHCO3 was added (1 L)
  20. 20
    workup.STIRRINGThe resulting suspension was stirred for 15 min
  21. 21
    Другоеresulting in a two layer mixture
  22. 22
    ДругоеThe organic layer was separated
  23. 23
    Сушкаdried over MgSO4
  24. 24
    Фильтрацияfiltered
  25. 25
    Концентрированиеconcentrated in vacuo

Методика

A 3 L three-necked round bottom flask equipped with an overhead stirrer, nitrogen inlet and thermocouple was charged with (1S)-1-(5-chloro-3-(2-(methylsulfonyl)phenyl)quinoxalin-2-yl)ethanamine (130 g, 358 mmol), 4-amino-6-chloropyrimidine-5-carbonitrile (55.4 g, 358 mmol), butan-1-ol (920 mL) and N,N-diisopropylethylamine (187 mL, 1.08 mol). The reaction mixture was heated to an internal temperature of 95-100° C. for 6 h and then allowed to cool to rt overnight. After this time the reaction was heated to an internal temperature of 100° C. and then cooled to an internal temperature of 50° C. Ethyl acetate (−1.5 L) was added at 50° C. and the reaction was allowed to cool to rt. The resulting solution was washed with water (3×1 L), 10 wt % aq. NaHSO4 (4×1 L) and brine (1×500 mL). The separated organic layer was dried over MgSO4, filtered and concentrated in vacuo. The resulting residue was suspended in toluene (1 L), evaporated in vacuo and dried under high vacuum for 36 h (247 g of crude material was obtained). The crude material was suspended in EtOAc (2 L), filtered and washed with a 10 wt % aqueous NaHSO4 solution (4×1 L). A white solid started to form in the EtOAc layer. A magnetic stir bar was added and the suspension was stirred at rt overnight and at 0° C. for 2 h. The white solid was isolated by filtration of the EtOAc and dried on a glass filter under a stream of nitrogen for two days, the EtOAc filtrate (filtrate A) was set aside. The white solid (51 g) was then suspended in EtOAc (2 L) and saturated aqueous NaHCO3 was added (1 L). The resulting suspension was stirred for 15 min resulting in a two layer mixture. The organic layer was separated, dried over MgSO4, filtered concentrated in vacuo to give the desired product. Filtrate A was then concentrated in vacuo, adsorbed on silica and purified by MPLC (DCM/MeOH+10% NH4OH: 100/0 to 90/10) to give 92 g of desired product. The two isolated products were combined and dissolved in EtOH (500 mL). The resulting solution was concentrated in vacuo. This process of dissolution in EtOH and concentration was repeated three times (3×500 mL). The resulting solid was ground (mortar and pestle) to a powder and dried in a vacuum oven (temperature: 90-100° C.) over P2O5 for 84 h. After this time the material was again ground, transferred to an oversized pan and dried under high vacuum at 100-110° C. for 24 h to give (S)-4-amino-6-((1-(5-chloro-3-(2-(methylsulfonyl)phenyl)quinoxalin-2-yl)ethyl)amino)pyrimidine-5-carbonitrile (127.9 g). 1H NMR (DMSO-d6) δ ppm 8.06-8.20 (m, 3H), 7.96-7.77 (m, 5H), 7.64-7.65 and 6.79-6.80 (m, 1H), 7.28 (br.s., 2H), 5.42-5.45 (m, 1H), 3.32 and 3.22 (s, 3H), 1.51 and 1.40 (d, J=6.6 Hz, 3H). Mass Spectrum (ESI) m/z=480.0 (M+1). Karl Fisher and GC analysis of an analytical sample showed that the material contained 0.45 wt % of water and 0.55 wt % of EtOH.

Источник

DOI: 10.6084/m9.figshare.5104873.v1Патент: US08835432B2uspto-grants-2014_09