반응 #704856

반응 방정식

methyl lactate

behenyl alcohol

sodium hydride

→

Behenyl Lactate

반응 조건

후처리

1. 1
   기타in a transesterification reaction
2. 2
   기타purged with nitrogen
3. 3
   기타inserted with overhead stirrer
4. 4
   기타At this temperature over 2 ml of methanol was collected
5. 5
   온도The contents were heated to 200° C. with a nitrogen sweep
6. 6
   기타to remove any volatile components
7. 7
   온도After approximately 15 minutes at 200° C. the contents were cooled
8. 8
   온도Upon cooling the product
9. 9
   기타crystallized

실험 절차

Behenyl Lactate was prepared by reacting methyl lactate (Aldrich Chemical Company, Inc. of Milwaukee, Wis.) with Lanette 22 (behenyl alcohol, 90%, Henkel Corp. of Ambler, Pa.) in a transesterification reaction according to the following method: 0.2 g sodium hydride (60% in mineral oil) was added to 32.6 grams Lanette 22 at 70° C. in a 3-neck 250 ml glass flask purged with nitrogen and inserted with overhead stirrer, Dean Stark trap, thermometer, and condenser. To this was slowly added 9.4 g of methyl lactate and the contents were slowly heated to 160° C. and held at that temperature for one hour. At this temperature over 2 ml of methanol was collected. The contents were heated to 200° C. with a nitrogen sweep to remove any volatile components. After approximately 15 minutes at 200° C. the contents were cooled. Upon cooling the product crystallized and had a melting point of approximately 57° C.

출처