반응 #70109
ord-6a184bdeff5f4c2d835dc5d3c5ea74fc
반응 방정식
반응물
시약
반응 조건
후처리
- 1workup.WAITThe reaction was left over weekend
- 2기타Salts were removed by treatment with ion exchanger AMB200C and IRA67
- 3여과The solution was filtered from the resin
- 4기타evaporated
- 5기타An aliquot of the crude material was purified by preparative HPLC (column Phenomenex Luna C18(2) 10 μm 250×50.0 mm, solvents
- 6기타The product was obtained in 639 mg after lyophilisation
- 7workup.WAITgradient 0-30% B over 20 min
- 8기타gave two isomeric peaks
- 9세척eluting between 12.50-12.85 minutes with m/z 1636.6 (MH+) corresponding to the structure
실험 절차
To a stirred solution of water/methanol (4.9 ml, 2.5 ml) and potassium hydroxide (0.49 g, 8.7 mmol) at 40° C. was added 5-acetylamino-N,N′-bis-(2,3-dihydroxypropyl)-2,4,6-triiodo isophthalamide (5.0 g, 6.7 mmol). To the clear solution was then added boric acid (0.29 g, 4.6 mmol). The mixture was cooled to room temperature and pH adjusted to 12.6. 2-(4-oxiran-2-ylbutyl)oxirane (0.327 g, 2.3 mmol) was added. The pH of the solution was adjusted to the interval 12.6-13. The reaction was left over weekend. To the solution was added HCl (18%) to pH 4. Salts were removed by treatment with ion exchanger AMB200C and IRA67. The solution was filtered from the resin and evaporated. An aliquot of the crude material was purified by preparative HPLC (column Phenomenex Luna C18(2) 10 μm 250×50.0 mm, solvents: A=water and B=acetonitrile; gradient 07-13% B over 60 min; flow 50.0 ml/min, UV detection at 214 nm and 254 nm). The product was obtained in 639 mg after lyophilisation. Analysis by LC-MS (column Agilent Zorbax SB-Aq 3.5 μm 3.0×100 mm, solvents: A=water/0.1% formic acid and B=acetonitrile/0.1% formic acid; gradient 0-30% B over 20 min; flow 0.3 ml/min, UV detection at 214 and 254 nm, ESI-MS) gave two isomeric peaks eluting between 12.50-12.85 minutes with m/z 1636.6 (MH+) corresponding to the structure.