반응 #640557

반응 방정식

potassium sulfite hydrate

potassium metabisulfite

perfluoro(methyl vinyl ether)

→

desired product

Potassium 1,1,2-Trifluoro-2-(trifluoromethoxy)ethanesulfonate

용매

water

반응 조건

후처리

1. 1
   기타evacuated to −3 psig (81 kPa)
2. 2
   기타purged with nitrogen
3. 3
   온도is heated to 125° C. at which time the internal pressure
4. 4
   온도The reaction temperature is maintained at 125° C. for 6 hr
5. 5
   온도cooled to 25° C
6. 6
   온도Once cooled
7. 7
   기타a white crystalline precipitate of the forms, leaving clear colorless liquid above it (pH=7)

실험 절차

A 1-gallon Hastelloy C276 reaction vessel is charged with a solution of 114 g potassium sulfite hydrate (KHSO3.H2O, 95%, Aldrich, 0.72 mol), 440 g potassium metabisulfite (K2S2O5, 99%, Mallinckrodt, 1.98 mol) and 2000 mL of deionized water. The pH of this solution is 5.8. The vessel is cooled to −35° C., evacuated to −3 psig (81 kPa), and purged with nitrogen. This evacuate/purge cycle is repeated two more times. 600 g perfluoro(methyl vinyl ether) (PMVE, 3.61 mol) is added to the vessel, which is heated to 125° C. at which time the internal pressure is 462 psig (3290 kPa). The reaction temperature is maintained at 125° C. for 6 hr. The pressure drops to 25 psig (275 kPa) at which point the vessel is vented and cooled to 25° C. Once cooled, a white crystalline precipitate of the forms, leaving clear colorless liquid above it (pH=7). 19F NMR of the white solid shows it to be the desired product in high purity (>98%). 19F NMR of the liquid shows a small but detectable amount of the hydration product of Equation (3), above.

출처