반응 #5768

반응 방정식

2-ethyl-4-quinolone

hydrochloric acid

aniline

ethyl propionylacetate

sodium hydride

N-bromosuccinimide

2-(4-bromomethylphenyl)-5,5-dimethyl-1,3,2-dioxaborinane

4-methylphenylboronic acid

2,2-dimethylpropan-1,3-diol

→

4-[(2-ethylquinolin-4-yloxy)methyl]phenylboronic acid hydrochloride

용매

water

NMP

ethyl acetate

water

NMP

cyclohexane

cyclohexane

반응 조건

후처리

1. 1
   온도by heating
2. 2
   온도heating the mixture
3. 3
   온도at reflux for 3 hours
4. 4
   기타removing
5. 5
   여과by filtration]
6. 6
   workup.ADDITIONwas added
7. 7
   온도the mixture was heated at 60°-70° C. for 18 hours
8. 8
   온도to cool
9. 9
   workup.ADDITIONacetic acid was then added until the mixture
10. 10
    기타the organic phase was separated
11. 11
    세척washed with water
12. 12
    건조dried (MgSO4)
13. 13
    기타Volatile material was removed by evaporation
14. 14
    기타to give a crystalline solid
15. 15
    workup.STIRRINGthe mixture was stirred for 18 hours
16. 16
    여과The resultant precipitate was collected by filtration
17. 17
    세척washed with ethyl acetate
18. 18
    기타dried

실험 절차

A solution of 2-ethyl-4-quinolone (6.9 g; 0.04 mole), (prepared using a similar procedure to that described in Org. Syn., Coll., Vol. III, p. 374 and p. 593 from aniline and ethyl propionylacetate) in (NMP) (50 ml) was added over 30 minutes to a stirred suspension of sodium hydride (1.6 g of a 60% dispersion in mineral oil; 0.04 mole) in NMP (50 ml) and the mixture stirred for 30 minutes. A solution of 2-(4-bromomethylphenyl)-5,5-dimethyl-1,3,2-dioxaborinane in cyclohexane [previously prepared by heating a mixture of 4-methylphenylboronic acid (6.8 g) and 2,2-dimethylpropan-1,3-diol (5.2 g) in cyclohexane (150 ml) at reflux with azeotropic removal of water, followed by the addition of N-bromosuccinimide (8.9 g) and azo(bisisobutyronitrile) (0.2 g), heating the mixture at reflux for 3 hours, and removing suspended succinimide by filtration] was added and the mixture was heated at 60°-70° C. for 18 hours. The mixture was allowed to cool and acetic acid was then added until the mixture was at pH 4, followed by water (200 ml) and ethyl acetate (200 ml). The mixture was stirred for 20 minutes and then the organic phase was separated, washed with water and dried (MgSO4). Volatile material was removed by evaporation to give a crystalline solid. The solid was dissolved in ethyl acetate (150 ml), concentrated hydrochloric acid (3 ml) and water (3 ml) were added and the mixture was stirred for 18 hours. The resultant precipitate was collected by filtration, washed with ethyl acetate and dried to give 4-[(2-ethylquinolin-4-yloxy)methyl]phenylboronic acid hydrochloride (7 g) as a solid; NMR (d4 -methanol): 1.5(t,3H), 3.21(q,2H), 5.78(s,2H), 7.55(s,1H), 7.6-8.15(m,7H), 8.40(d,2H).

출처