반응 #56199

ord-53179156abd545e69303df43be89a7f3

반응 조건

상세 조건
See reaction.notes.procedure_details.

후처리

  1. 1
    기타In a 250 cm3 reaction vessel
  2. 2
    기타fitted with a stirrer
  3. 3
    workup.ADDITIONis then slowly added at ambient temperature
  4. 4
    온도The mixture is cooled
  5. 5
    기타close to 20° C.
  6. 6
    workup.ADDITIONis added
  7. 7
    workup.ADDITIONThe temperature gradually rises during the course of the addition
  8. 8
    온도is then heated
  9. 9
    온도to reflux for 3 hours
  10. 10
    온도After cooling
  11. 11
    workup.ADDITIONthe mixture is poured
  12. 12
    추출the resulting mixture is extracted with chloroform
  13. 13
    추출The chloroform extract
  14. 14
    세척is then washed with water
  15. 15
    workup.ADDITIONcontaining caustic soda
  16. 16
    건조It is dried over anhydrous sodium sulphate
  17. 17
    여과The product is then filtered
  18. 18
    농축the filtrate concentrated to an oily residue which
  19. 19
    workup.DISTILLATIONis distilled
  20. 20
    기타a fraction is collected boiling at 178°-184° C. at 0.6 to 0.8 torr

실험 절차

In a 250 cm3 reaction vessel fitted with a stirrer, a cooler, a dropping funnel and a thermometer, is placed 23.2 g (0.173 mole) of anhydrous aluminum chloride in suspension in 40 ml of methylene chloride. 35.3 g (0.252 mole) of benzoyl chloride dissolved in 40 cm3 of methylene chloride is then slowly added at ambient temperature. The aluminum chloride tends to pass into solution while the temperature gradually rises several degrees. The mixture is cooled to hold the temperature close to 20° C. and a solution of 11.1 g (0.063 mole) of methyl indane-2-carboxylate dissolved in 50 cm3 of methylene chloride is added. The temperature gradually rises during the course of the addition and the mixture turns a light brown color. The mixture is stirred for one hour at ambient temperature and is then heated to reflux for 3 hours. After cooling, the mixture is poured into acidified iced water and the resulting mixture is extracted with chloroform. The chloroform extract is then washed with water containing caustic soda, then with slightly acidified water and finally with water. It is dried over anhydrous sodium sulphate. The product is then filtered and the filtrate concentrated to an oily residue which is distilled and a fraction is collected boiling at 178°-184° C. at 0.6 to 0.8 torr.

출처

DOI: 10.6084/m9.figshare.5104873.v1특허: US04224341uspto-grants-1980_09