반응 #536364
ord-2955b349c51449008a3478e4ee13e5a6
반응 방정식
용매
반응 조건
후처리
- 1workup.DISSOLUTIONAfter being dissolved
- 2온도by heating
- 3온도the solution was refluxed with vigorous stirring
- 4기타was from 106 to 108 deg. C
- 5기타Four hours
- 6기타After removing about 42 mL of the solvent under a reduced pressure
- 7workup.ADDITIONby adding 23 mL of acetic acid
- 8기타The precipitate which was obtained
- 9workup.STIRRINGstirring over-night
- 10여과was filtered
- 11세척the filtrate was washed with acetic acid
- 12세척After being washed with acetone
- 13기타dried for 5 hours from 40 to 50 deg. C
실험 절차
5.835 g of methyl carbamate and 10.000 g of 2-oxo-4-(hydroxymethylphosphinyl)-butanoic acid were added to 17 mL of acetic acid to be suspended. After being dissolved by heating, 68 mL of toluene was added thereto and then the solution was refluxed with vigorous stirring. The internal temperature of the reaction solution was from 106 to 108 deg. C. Four hours later, dissipation of almost all the raw materials was confirmed by HPLC measurement. At this point, the area ratio of Z form to E form was 94:6. After removing about 42 mL of the solvent under a reduced pressure, followed by adding 23 mL of acetic acid, and then the resultant was stirred for 1 hour at 80 deg. C. The precipitate which was obtained by cooling the solution gradually to room temperature and stirring over-night, was filtered and then the filtrate was washed with acetic acid. After being washed with acetone, dried for 5 hours from 40 to 50 deg. C. under a reduced pressure, 9.931 g of the objective compound was obtained (75.4% yield, Z:E=99.6:0.4).