반응 #518096

반응 방정식

p-tert-butoxystyrene

p-tert-butylstyrene

methanol

→

p-tert-butoxystyrene p-tert-butylstyrene

용매

acetone

반응 조건

후처리

1. 1
   기타precipitated resin
2. 2
   기타the resultant was dried under reduced pressure

실험 절차

With the use of 100 g (0.567 mole) of p-tert-butoxystyrene and 5.3 g (0.03 mole) of p-tert-butylstyrene, the same polymerization reaction and after-treatment as described in Production Example 2-(1) were conducted. Then, the resulting viscous resinous material was dissolved in 300 g of acetone and poured into 2000 ml of 50% aqueous methanol solution and precipitated resin was subjected to decantation. This process step was conducted further twice, and the resultant was dried under reduced pressure to give 94.5 g of poly(p-tert-butoxystyrene/p-tert-butylstyrene) as white powders. Then, 70 g of the polymer was subjected to the same reaction and after-treatment as described in Production Example 9-(1) to give 48.5 g of poly(p-hydroxystyrene/p-tert-butylstyrene) as white powders. A ratio of p-hydroxystyrene unit and p-tert-butylstyrene unit was about 94:6 by 1HNMR. Mw: about 16000, Mw/Mn: 1.29 (GPC method: polystyrene as standard).

출처