반응 #48891

반응 방정식

methyl-9-decenoate

2,7-di-tert-butyl-9,9-dimethyl-4,5-bis(diphenylphosphino)xanthene

→

methyl 11-hydroxyundecanoate

반응 조건

후처리

1. 1
   기타A hydroformylation reaction
2. 2
   기타equipped with a mechanical stirrer, gas inlet tube
3. 3
   온도heating jacket, pressure transducer and thermocouple
4. 4
   기타the reactor was sealed
5. 5
   기타synthesis gas (CO/H2, 1:1)
6. 6
   기타The system was flushed with synthesis gas twice
7. 7
   온도while maintaining 450 psi (3,103 kPa) of syn gas pressure
8. 8
   온도the temperature was raised to 100° C.
9. 9
   온도heated for an additional 4 h
10. 10
    온도The reactor was cooled to ambient temperature
11. 11
    기타After flushing the reactor with nitrogen
12. 12
    기타to remove the last traces of syn gas, dioxane (50 ml) and 1 g of 5% Pt/SiO2
13. 13
    workup.ADDITIONwere introduced to the reactor
14. 14
    기타The system was flushed with hydrogen twice
15. 15
    온도The mixture was then heated to 150° C. for 20 h
16. 16
    온도maintaining 500 psi (3,448 kPa) of hydrogen pressure
17. 17
    온도After cooling
18. 18
    여과the contents were filtered
19. 19
    기타to remove the solid catalyst
20. 20
    기타the solvent was removed by rotary evaporation
21. 21
    workup.DISTILLATIONThe resulting liquid was subjected to distillation under reduced pressure
22. 22
    기타The fraction boiling at 140-150° C. (1.5 mm pressure) was collected
23. 23
    workup.DISSOLUTIONdissolved in 1200 mL of hexanes
24. 24
    기타to crystallize in a freezer for 18 h
25. 25
    여과White crystals were collected by cold filtration
26. 26
    세척washed once with cold hexanes
27. 27
    기타Drying under reduced pressure
28. 28
    기타yielded

실험 절차

A hydroformylation reaction was carried out in a Parr reactor (300 mL capacity) equipped with a mechanical stirrer, gas inlet tube, heating jacket, pressure transducer and thermocouple. The reactor was charged with methyl-9-decenoate (100 g, 0.54 mol), acetylacetonate(dicarbonyl)-rhodium (II) [Rh(CO)2 acac] (32 mg, 0.12 mmol), and 2,7-di-tert-butyl-9,9-dimethyl-4,5-bis(diphenylphosphino)xanthene (342 mg, 0.49 mmol) under nitrogen, and then the reactor was sealed. The reactor was connected to a feed line for delivering synthesis gas (CO/H2, 1:1). The system was flushed with synthesis gas twice and then pressurized to 450 psi (3,103 kPa). The reactor was heated to 85° C. for 16 h while maintaining 450 psi (3,103 kPa) of syn gas pressure. After 16 h, the temperature was raised to 100° C. and heated for an additional 4 h. The reactor was cooled to ambient temperature and the unreacted gas was vented. After flushing the reactor with nitrogen to remove the last traces of syn gas, dioxane (50 ml) and 1 g of 5% Pt/SiO2 were introduced to the reactor. The system was flushed with hydrogen twice and pressurized to 500 psi (3,448 kPa) with hydrogen. The mixture was then heated to 150° C. for 20 h maintaining 500 psi (3,448 kPa) of hydrogen pressure. After cooling, the contents were filtered to remove the solid catalyst, and the solvent was removed by rotary evaporation. The resulting liquid was subjected to distillation under reduced pressure. The fraction boiling at 140-150° C. (1.5 mm pressure) was collected and dissolved in 1200 mL of hexanes. The solution was then allowed to crystallize in a freezer for 18 h. White crystals were collected by cold filtration and washed once with cold hexanes. Drying under reduced pressure yielded methyl 11-hydroxyundecanoate as white solid (77 g; 65% overall yield). Conversion of methyl 11-hydroxyundecanoate via transesterification with a polyol, such as glycerol, to the corresponding polyester polyol, such as the triglyceride of 11-hydroxyundecanoic acid, can be effected by transesterification methods known in the art.

출처