반응 #461922

반응 방정식

iron

ferrocene

→

toluene ferrocene

용매

toluene

toluene

반응 조건

후처리

1. 1
   온도was cooled to room temperature
2. 2
   workup.ADDITIONthe slurry was mixed at room temperature overnight
3. 3
   기타to evaporate at room temperature

실험 절차

An iron containing ZSM-5 catalyst was prepared by the following method: about 10 g of the same HZSM-5 as that of Example 1 was heated in a stream of dry air to 375° C. for 4 hours and then was cooled to room temperature. A solution of 0.3331 g of ferrocene (dicyclopentadienyliron) in 30 g dry toluene was then added to the dried zeolite and the slurry was mixed at room temperature overnight. Excess toluene was allowed to evaporate at room temperature to give a toluene/ferrocene wetted zeolite. The recovered solid was then calcined in a stream of dry air at about 538° C. for about 6 hours to produce the desired iron containing catalyst, Catalyst D. The iron loading of this catalyst is about 1.05 wt. %.

출처