반응 #2175422

반응 방정식

EDMA

1,4-butanediol

AIBN

methacrylate

→

11-acrylamidoundecanoic acid

용매

water

1-propanol

반응 조건

후처리

1. 1
   기타For the preparation of stationary phases
2. 2
   기타purged with nitrogen for 10 min
3. 3
   기타sealed with rubber septum
4. 4
   기타to polymerize for 20 hours at 60° C
5. 5
   기타The reaction scheme for the polymerization
6. 6
   기타After the polymerization of the mixture
7. 7
   세척the monolithic column was washed with methanol for 12 hours
8. 8
   기타to remove unreacted monomers and porogens

실험 절차

For the preparation of stationary phases, the inner walls of capillaries were vinylized with 3-(trimethoxylsilyppropyl methacrylate. Subsequently, AAUA, EDMA, 1-propanol, 1,4-butanediol, water, and AIBN were mixed ultrasonically into a homogenous solution and purged with nitrogen for 10 min. A 45 cm long silanized capillary was tilled with the polymerization mixture up to a length of 35 cm, sealed with rubber septum, and then placed in a gas chromatography (GC) oven to polymerize for 20 hours at 60° C. The reaction scheme for the polymerization is shown in Scheme 1. Each column of the experimental design was made in duplicate. After the polymerization of the mixture, the monolithic column was washed with methanol for 12 hours using a HPLC pump to remove unreacted monomers and porogens. An on-column detection window was made next to the polymer bed using a thermal wire stripper. Finally, the column was cut to 45 cm with an effective length of 30 cm.

출처