반응 #2069923

반응 방정식

4-Isopropylaniline

potassium iodide

sodium nitrite

sulphuric acid

→

4-Isopropyliodobenzene

용매

water

water

water

반응 조건

후처리

1. 1
   기타does not rise above 20° C
2. 2
   workup.ADDITIONOn completion of the dropwise addition
3. 3
   workup.STIRRINGThe reaction mixture is stirred at 80° C. for 1 h
4. 4
   온도After cooling
5. 5
   기타the organic phase is removed
6. 6
   추출the aqueous phase is extracted four times more with 100 ml of ether
7. 7
   세척The combined organic phases are washed with dilute sodium hydroxide solution and dist
8. 8
   건조water, and dried over sodium sulphate
9. 9
   기타After the solvent has been removed
10. 10
    workup.DISTILLATIONthe crude product is distilled in a membrane-pump vacuum
11. 11
    기타The slightly reddish target product distils over at a temperature of 100-105° C. (15 mbar)

실험 절차

4-Isopropylaniline (49.5 g, 366 mmol) is suspended in 200 ml of dist. water and admixed gradually under ice cooling with 200 ml of semiconcentrated sulphuric acid. Subsequently, a solution of sodium nitrite (25.5 g, 370 mmol) in 200 ml dist. water is added dropwise at such a rate that the temperature does not rise above 20° C. On completion of the dropwise addition, the mixture is stirred at 2° C. for another 20 min. The resulting clear reddish diazonium salt solution is now added through a filter to a solution of potassium iodide (135.0 g, 813 mmol) in 200 ml of dist. water. The reaction mixture is stirred at 80° C. for 1 h. In the course of this, the solution becomes black with vigorous gas evolution and an oily organic phase separates out. After cooling, the organic phase is removed and the aqueous phase is extracted four times more with 100 ml of ether. The combined organic phases are washed with dilute sodium hydroxide solution and dist. water, and dried over sodium sulphate. After the solvent has been removed, the crude product is distilled in a membrane-pump vacuum. The slightly reddish target product distils over at a temperature of 100-105° C. (15 mbar).

출처