반응 #1869168
ord-805059097d6842fea67f3471bb31e042
반응 방정식
반응물
시약
반응 조건
후처리
- 1온도maintaining the temperature below 30° C
- 2workup.STIRRINGThe resulting solution was stirred for 60 minutes at 15° C
- 3기타When all the 2-chloro-1-[6-(2,5-dimethylpyrrol-1-yl)pyridin-3-yl]ethanone was consumed the reaction mixture
- 4workup.ADDITIONwas treated with concentrated HCl (27% w/w, 47 Kg) over 80 minutes
- 5온도maintaining the temperature below 30° C
- 6온도The mixture was cooled to 15° C.
- 7workup.ADDITIONNaOH (34% w/w, 79 Kg) was added over 60 minutes
- 8온도maintaining the temperature below 30° C
- 9기타When all the chloroalcohol intermediate was consumed
- 10기타the aqueous phase was separated
- 11workup.ADDITIONDCM (150 L) and water (140 L) were added
- 12workup.STIRRINGthe mixture was stirred
- 13기타to separate
- 14세척The organic phase was washed with water (2×30 L)
- 15workup.DISTILLATIONThe equipment was set for distillation and DCM
- 16기타to give a final volume of 160 litres
- 17workup.WAITThe reaction mixture was left
- 18온도at reflux overnight
- 19온도After cooling to room temperature
- 20세척the mixture was washed with water (3×30 L)
- 21workup.DISTILLATIONThe equipment was set for distillation
- 22기타to give a final volume of 84 litres
- 23온도the mixture was cooled to 5° C. over 8 hours
- 24workup.WAITgranulated at 5° C. for 6 hours
- 25여과The product was collected by filtration
- 26세척washed with ααα-trifluorotoluene (2×30 L)
- 27기타dried at 45° C. under vacuum overnight
실험 절차
Water (15.0 L) was added to a suspension of sodium borohydride (4.11 Kg, 109 mol) in tetrahydrofuran (140 L) at 15° C. and the resulting solution stirred at 15° C. A solution of 2-chloro-1-[6-(2,5-dimethylpyrrol-1-yl)pyridin-3-yl]ethanone (30.0 Kg, 120.6 mol) in tetrahydrofuran (100 L) and water (15 L) was added over 40 minutes maintaining the temperature below 30° C. The resulting solution was stirred for 60 minutes at 15° C. When all the 2-chloro-1-[6-(2,5-dimethylpyrrol-1-yl)pyridin-3-yl]ethanone was consumed the reaction mixture was treated with concentrated HCl (27% w/w, 47 Kg) over 80 minutes maintaining the temperature below 30° C. The mixture was cooled to 15° C. and NaOH (34% w/w, 79 Kg) was added over 60 minutes maintaining the temperature below 30° C. The mixture was then granulated at 20° C. overnight. When all the chloroalcohol intermediate was consumed, the aqueous phase was separated. DCM (150 L) and water (140 L) were added and the mixture was stirred before allowing the phases to separate. The organic phase was washed with water (2×30 L). (S)-(+)-2-amino-1-propanol (17.2 Kg, 229 mol) and tetrahydrofuran (15 L) were added over 20 minutes. The equipment was set for distillation and DCM was replaced by tetrahydrofuran to give a final volume of 160 litres. The reaction mixture was left at reflux overnight. After cooling to room temperature, DCM (150 L) was added and the mixture was washed with water (3×30 L). The equipment was set for distillation and the tetrahydrofuran and DCM were replaced by acetonitrile to give a final volume of 84 litres. ααα-trifluorotoluene (300 L) was added over 60 minutes, the mixture was cooled to 5° C. over 8 hours and granulated at 5° C. for 6 hours. The product was collected by filtration, washed with ααα-trifluorotoluene (2×30 L) and dried at 45° C. under vacuum overnight. Yield=65% (22.7 Kg) δH (CDCl3, 300 MHz) 1.10 (3H, t), 2.10 (6H, s), 2.7-3.2 (3H, m), 3.45 (1H, m), 3.70 (H, dd), 4.85 (1H, m), 5.90 (2H, s), 7.20 (1H, d), 7.90 (1H, dd), 8.60 (1H, d) ppm. MS m/z 290 (MH+). The intermediate epoxide was characterised as δH (CDCl3, 300 MHz) 2.10 (6H, s), 2.90 (1H, dd), 3.25 (1H, dd), 4.00 (1H, dd), 5.90 (2H, s), 7.20 (1H, d), 7.70 (1H, dd), 8.40 (1H, d) ppm. MS m/z 215 (MH+).