반응 #1773090
ord-22e63d9e5d4047888b2f44170e4ef4ac
반응 조건
후처리
- 1workup.ADDITIONthe reaction mixture is introduced into a 2 l hydrogenation autoclave
- 2세척is rinsed with hydrogen twice
- 3추출The still hot reaction solution is extracted with
- 4여과a nutsch filter
- 5세척the catalyst is washed with 200 ml
- 6기타is first adjusted at 40-60° C. to a pH of 2-2.5 with 50% sodium hydroxide solution, during which process
- 7온도The reaction mixture is cooled in an ice bath to a temperature of 0-10° C.
- 8추출the product is extracted with a nutsch filter
- 9세척washed with 300 ml
- 10기타dried in a drying oven in vacuo at 50-70° C.
실험 절차
100 g (661.5 mmol) D-phenylglycine are dissolved or suspended in 890 ml deionised water, 290 ml isopropanol and 66.7 ml (802 mmol) 37% hydrochloric acid. After addition of 10 g of the Pt/Rh catalyst, 4% Pt+1% Rh on activated carbon (water content approx. 50%, corresponding to approx. 5 wt. % catalyst relative to D-phenylglycine used), the reaction mixture is introduced into a 2 l hydrogenation autoclave. After being rendered inert with nitrogen three times, it is rinsed with hydrogen twice, then a hydrogen overpressure of 8-10 bar is established and the reaction solution heated to 50-60° C. After approximately 6 to 8 hours, hydrogen uptake is completed (theoretical amount of H2 44.4 l). The hydrogenator is depressurised and once again rendered inert with nitrogen three times. The still hot reaction solution is extracted with a nutsch filter and the catalyst is washed with 200 ml deionised water. The filtrate is first adjusted at 40-60° C. to a pH of 2-2.5 with 50% sodium hydroxide solution, during which process the first crystals form. It is then stirred for a further 15-30 minutes at this pH and then adjusted to a pH of 5-6 with 50% sodium hydroxide solution. The reaction mixture is cooled in an ice bath to a temperature of 0-10° C., the product is extracted with a nutsch filter, washed with 300 ml deionised water and dried in a drying oven in vacuo at 50-70° C.