반응 #1755449

반응 방정식

potassium hydroxide

2,2,3,3,4,4,4-heptafluorobutan-1-ol

1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulfonyl fluoride

potassium hydroxide

→

crude product

수율 72.6%

2,2,3,3,4,4,4-heptafluorobutyl 1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulfonate

수율 72.6%

반응 조건

후처리

1. 1
   기타The flask was equipped with an overhead mechanical stirrer, cold water condenser
2. 2
   기타did not exceed 35° C
3. 3
   여과Precipitated salts were then filtered from the mixture
4. 4
   기타the lower liquid fluorochemical product phase was separated from the upper aqueous phase
5. 5
   세척washed once with water

실험 절차

2,2,3,3,4,4,4-heptafluorobutan-1-ol (200 g, 1.0 mol, obtained from 3M Company) and 1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulfonyl fluoride (300 g, 1.0 mol, obtained from 3M Company) were combined in a 1-liter, 3-necked round bottom flask. The flask was equipped with an overhead mechanical stirrer, cold water condenser, thermocouple and an addition funnel. Aqueous potassium hydroxide (45 percent by weight in water, 154 g, 1.05 mol) was added dropwise via the addition funnel at such a rate that the temperature did not exceed 35° C. Once the addition of the potassium hydroxide was complete, the mixture was stirred for 16 hours at room temperature. Precipitated salts were then filtered from the mixture and the lower liquid fluorochemical product phase was separated from the upper aqueous phase and washed once with water to give 350 g crude product. The product was distilled at atmospheric pressure and the distillation cut boiling from 140-150° C. used without further purification (96.3 percent purity by GC).

출처