반응 #1755447

반응 방정식

potassium hydroxide

2,2,3,4,4,4-hexafluorobutan-1-ol

1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulfonyl fluoride

→

2,2,3,4,4,4-hexafluorobutyl 1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulfonate

용매

water

반응 조건

후처리

1. 1
   기타The flask was equipped with a magnetic stirrer, cold water condenser
2. 2
   workup.ADDITIONthermocouple and a 250-mL addition funnel
3. 3
   기타did not exceed 35° C
4. 4
   workup.ADDITIONOnce the addition of the base
5. 5
   여과The precipitated salts were then filtered from the mixture
6. 6
   기타the lower liquid fluorochemical product phase was separated from the upper aqueous phase
7. 7
   기타were removed by atmospheric distillation

실험 절차

2,2,3,4,4,4-hexafluorobutan-1-ol (202 g, 1.1 mol, obtained from Sinochem Corp., Beijing, China), 1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulfonyl fluoride (332 g, 1.1 mol, obtained from 3M Company of Saint Paul, Minn.) and water (300 g) were combined in a 3-L, 3-necked round bottom flask. The flask was equipped with a magnetic stirrer, cold water condenser, thermocouple and a 250-mL addition funnel. Aqueous potassium hydroxide (149.3 g, 45 weight percent, 1.22 equivalents) was added dropwise via an addition funnel at such a rate that the temperature did not exceed 35° C. Once the addition of the base was complete the mixture was stirred for 16 hours at room temperature. The precipitated salts were then filtered from the mixture and the lower liquid fluorochemical product phase was separated from the upper aqueous phase. Unreacted 2,2,3,4,4,4-hexafluorobutan-1-ol and 1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulfonyl fluoride were removed by atmospheric distillation.

출처