반응 #1747850

반응 방정식

carisoprodol

diclofenac sodium

→

carisoprodol diclofenac

반응 조건

후처리

1. 1
   기타is prepared
2. 2
   workup.ADDITIONmix for 5 minutes
3. 3
   workup.ADDITIONThe granulation process is initiated by the gradual addition of a granulating solution
4. 4
   workup.ADDITIONcontaining a plasticizer
5. 5
   기타purified water to the high shear with continuous blending
6. 6
   기타to produce a wet blend
7. 7
   기타dried at 40-500 for 20 minutes in a fluid bed
8. 8
   기타to remove the water
9. 9
   workup.ADDITIONNext, the screened granules are mixed with a glidant

실험 절차

A second composition to cover the perforated coated cores is prepared as follows: carisoprodol, diclofenac sodium, a diluent and a hinder are placed in a high shear mixer and mix for 5 minutes. The granulation process is initiated by the gradual addition of a granulating solution containing a plasticizer and purified water to the high shear with continuous blending to produce a wet blend. Next, the wet blend is granulated and dried at 40-500 for 20 minutes in a fluid bed to remove the water. Then, the dry granules are screened through a 20 USP mesh screen for size reduction. Next, the screened granules are mixed with a glidant and a lubricant, that have been previously passed through a 60 mesh screen, in a V-Blender during 5 minutes. The granulate is applied over the perforated cores through compression to obtain carisoprodol-diclofenac coated osmotic devices. The coated device has an outer diameter of about 14 mm.

출처