반응 #1699045
ord-25143bc453d949ca8a292b1f5612b7a5
반응 방정식
반응 조건
후처리
- 1기타The catholyte was then removed from the cell
실험 절차
In a second example, a two-compartment cell was constructed, using a DSA anode, a cation exchange membrane (Nafion 902 from DuPont) and a Ni cathode. 10 liters each of 2 M 1-Butyl-3-Methylimidazolium Chloride and 1.5 M acetic acid were added to the two compartments, and 10 amps current was applied to the cell until the pH of the solution containing the acetic acid had risen to 7.0. The catholyte was then removed from the cell, and the 1-Butyl-3-Methylimidazolium Acetate product isolated by removing the water by rotary distillation as described above. The yield was 70% and had 329 ppm sodium and 893 ppm Cl. The product also contained 19% water, which could not easily be removed by vacuum evaporation. However, the 1-Butyl-3-Methylimidazolium Acetate product could be further dried by azeotropic distillation. The wet product was heated to reflux in a round bottom flask, fitted with a Dean-Stark trap with benzene was added. When no more water was collected in the trap, the benzene was removed by rotoevaporation. The product now contained <0.5% H2O.