반응 #1482005
ord-5f856017a8f24c8bb491481c223bf863
반응 방정식
반응물
시약
반응 조건
후처리
- 1workup.STIRRINGthe resulting mixture stirred at 0° C. for 30 minutes
- 2온도to warm to 20° C. for 16 hours
- 3세척The mixture was twice washed with saturated aqueous sodium hydrogen carbonate (2×2040 mL)
- 4세척once washed with 0.25 M aqueous hydrochloric acid solution (2040 mL)
- 5세척once washed with demineralized water (2040 mL)
- 6농축The resulting product solution was concentrated to 595 mL under reduced pressure
- 7workup.STIRRINGThe mixture was stirred for 2 hours
- 8여과before filtering
- 9세척washing the solids
- 10workup.ADDITIONwith a 50/50 mixture of propan-2-ol and dichloromethane (170 mL)
- 11농축concentrating to a volume of 595 mL
- 12workup.ADDITIONThe solution was diluted with propan-2-ol (510 mL)
- 13농축re-concentrated to a volume of 595 mL
- 14workup.ADDITIONbefore diluting with tert-butyl methyl ether (1700 mL)
- 15온도The resulting solution was cooled to 20° C.
- 16workup.STIRRINGthe mixture stirred for 18 hours
- 17농축before concentrating to a volume of 920 mL under reduced pressure
- 18여과After further granulation at 20° C. for an additional 48 hours the slurry was filtered
- 19세척washed with cold propan-2-ol (340 mL)
- 20기타The product solids were dried
실험 절차
Alternatively and preferably, the title compound is prepared as follows: A solution of methanesulfonic acid (34.0 g) in dichloromethane (85 mL) was added to a mixture of 1-methyl-5-[4′-(trifluoromethyl)[1,1′-biphenyl]-2-carboxamido]-1H-indole-2-carboxylic acid potassium salt hydrate (170 g), from step (d) alternative C, and 1-hydroxybenzotriazole hydrate (54.6 g) in dichloromethane (3400 mL) at 0° C. N-[3-(dimethylamino)propyl-N-ethylcarbodimide hydrochloride (88.4 g) in dichloromethane (680 mL) was then added over 30 minutes and the resulting mixture stirred at 0° C. for 1 hour. Triethylamine (53.9 g) in dichloromethane (170 mL) was then added over 10 minutes followed by a solution of (S)-N-benzyl-N-methyl-2-phenylglycinamide hydrochloride hydrate (120.6 g), from step (e), in dichloromethane (680 mL) and the resulting mixture stirred at 0° C. for 30 minutes before allowing to warm to 20° C. for 16 hours. The mixture was twice washed with saturated aqueous sodium hydrogen carbonate (2×2040 mL), once washed with 0.25 M aqueous hydrochloric acid solution (2040 mL) and once washed with demineralized water (2040 mL). The resulting product solution was concentrated to 595 mL under reduced pressure and the concentrate combined with an acidic ion-exchange resin (240 g) in propan-2-ol (595 mL). The mixture was stirred for 2 hours before filtering, washing the solids with a 50/50 mixture of propan-2-ol and dichloromethane (170 mL) and concentrating to a volume of 595 mL. The solution was diluted with propan-2-ol (510 mL) and then re-concentrated to a volume of 595 mL before diluting with tert-butyl methyl ether (1700 mL). The resulting solution was cooled to 20° C. and seeded and the mixture stirred for 18 hours before concentrating to a volume of 920 mL under reduced pressure. After further granulation at 20° C. for an additional 48 hours the slurry was filtered and washed with cold propan-2-ol (340 mL). The product solids were dried, yielding the product (S)-N-{2-[benzyl(methyl)amino]-2-oxo-1-phenylethyl}-1-methyl-5-[4′-(trifluoromethyl)[1,1′-biphenyl]-2-carboxamido]-1H-indole-2-carboxamide in Form A (192 g, 80%). HPLC retention time 11.50 minutes using the conditions specific to this example (noted above).