反応 #7301

反応方程式

ammonia

N-ethyldiisopropylamine

(S)-2-benzyloxycarbonylamino-3-(pyridin-3-yl)propionic acid

isobutyl chloroformate

→

Benzyl (S)-[1-carbamoyl-2-(pyridin-3-yl)-ethyl]carbamate

溶媒

tetrahydrofuran

反応条件

後処理

1. 1
   温度the internal temperature in the end increasing to −6° C
2. 2
   その他in the course of 3 h
3. 3
   温度the reaction mixture was warmed to 16° C.
4. 4
   その他which gave a thick but still stirrable crystal slurry
5. 5
   その他At a jacket temperature of 30° C., the solvent was removed under reduced pressure
6. 6
   workup.ADDITIONA solution of sodium hydrogen carbonate (3.0 kg) in water (50 l) was added
7. 7
   workup.DISSOLUTIONafter which all of the solid had dissolved
8. 8
   その他The organic phase was separated off
9. 9
   乾燥dried over sodium sulfate (1.0 kg)
10. 10
    ろ過the drying agent was filtered off
11. 11
    濃縮the filtrate was concentrated under reduced pressure at a bath temperature of 30° C. to a volume of about 6 l
12. 12
    ろ過The resulting precipitate was filtered off with suction
13. 13
    洗浄washed with ethyl acetate (1.5 l)
14. 14
    その他dried at 30° C. under reduced pressure
15. 15
    その他The chemical purity was 99.9% (HPLC: 125×4.0 mm RP18 Purospher, 40° C., detection 210 nm)
16. 16
    その他the enantiomeric purity was 100% ee (HPLC: 250×4.6 mm CSP Chiralpak AD Daicel, 40° C.; detection 248 nm; mobile phase: n-hexane/isopropanol/ethanol 84/12/4+0.1% diethylamine; tret [(S)-isomer] 14.93 min)

実験手順

A suspension of (S)-2-benzyloxycarbonylamino-3-(pyridin-3-yl)propionic acid (2.60 kg, 8.65 mol) in tetrahydrofuran (60 l) was cooled to −9° C. At this temperature, N-ethyldiisopropylamine (1.33 kg, 10.29 mol) was added over a period of 5 min. At −9° C., isobutyl chloroformate (1.36 kg, 9.96 mol) was then added within 20 min, the internal temperature in the end increasing to −6° C. After 10 min of vigorous stirring, ammonia gas (2.1 kg, about 123 mol) was introduced at a constant temperature of (−5)–(−6)° C. into the resulting thin suspension in the course of 3 h. The reaction was initially strongly exothermic (requires initially slow introduction), later on less exothermic. Over a period of 30 min, the reaction mixture was warmed to 16° C., which gave a thick but still stirrable crystal slurry. At a jacket temperature of 30° C., the solvent was removed under reduced pressure. The white, greasy residue was suspended in ethyl acetate (125 l). A solution of sodium hydrogen carbonate (3.0 kg) in water (50 l) was added and the mixture was stirred vigorously for 30 min, after which all of the solid had dissolved. The organic phase was separated off and dried over sodium sulfate (1.0 kg), the drying agent was filtered off and the filtrate was concentrated under reduced pressure at a bath temperature of 30° C. to a volume of about 6 l. The resulting precipitate was filtered off with suction, washed with ethyl acetate (1.5 l) and dried at 30° C. under reduced pressure. Yield: 2.26 kg (7.55 mol, 87.3% of theory). The chemical purity was 99.9% (HPLC: 125×4.0 mm RP18 Purospher, 40° C., detection 210 nm); the enantiomeric purity was 100% ee (HPLC: 250×4.6 mm CSP Chiralpak AD Daicel, 40° C.; detection 248 nm; mobile phase: n-hexane/isopropanol/ethanol 84/12/4+0.1% diethylamine; tret [(S)-isomer] 14.93 min). M.p.: 152.8° C. (by DSC); MS (ESI+): m/z (%): 300 ([M+H+], 100); 1H-NMR (200 MHz, DMSO-d6): δ=2.77 (dd, J=9.5 and 7.0 Hz, 1H), 3.02 (dd, J=9.5 and 3.5 Hz, 1H), 4.19 (m, 1H), 4.96 (s, 3H), 7.00–7.40 (m, 7H), 7.40–7.60 (m, 2H), 7.60–7.76 (m, 1H), 8.36–8.53 (m, 2H); IR (KBr): ν=3306.8, 1674.9, 1537.7, 1424.0, 1271.6, 1251.3 cm−1.

出典