反応 #487493

反応方程式

Dimethyl terephthalate

Stearyl Alcohol

→

white solid

収率 96.2%

distearyl terephthalate

収率 96.2%

反応条件

後処理

1. 1
   その他To a 2 L Buchi reactor equipped with a double turbine agitator and distillation apparatus
2. 2
   その他purge for 1 hour
3. 3
   workup.ADDITIONwas commenced followed by the addition of Tyzor catalyst (3.0 grams, available from Dupont)
4. 4
   温度The reaction mixture was then heated to 145° C.
5. 5
   その他to 190° C.
6. 6
   その他over a 3-4 hour
7. 7
   workup.DISTILLATIONis distilled in a controlled manner
8. 8
   温度The reaction temperature was maintained at 190° C. for an additional 16 hours until >96% conversion to the product
9. 9
   温度on cooling

実験手順

To a 2 L Buchi reactor equipped with a double turbine agitator and distillation apparatus was charged Dimethyl terephthalate (315.8 grams), Stearyl Alcohol (879.7 grams) and heated to 130° C. under Nitrogen purge for 1 hour, after which stirring was commenced followed by the addition of Tyzor catalyst (3.0 grams, available from Dupont). The reaction mixture was then heated to 145° C., followed by slowly ramping the temperature to 190° C. over a 3-4 hour period such that the evolution of methanol is distilled in a controlled manner. The reaction temperature was maintained at 190° C. for an additional 16 hours until >96% conversion to the product was achieved as determined by 1H NMR spectroscopy. The product was discharged as a low viscosity liquid which solidified on cooling to give a 1050 gram of a white solid (96.2% yield). The product was shown to be pure by 1H NMR spectroscopy with trace amounts of the mono-ester. Physical properties of this compound are shown in Table 2.

出典