反応 #465933

反応方程式

hydrogen peroxide

p-phenylenediamine

DI water

→

1-naphthol

溶媒

CH3COONa

反応条件

後処理

1. 1
   workup.ADDITION100 ml “A” was added to one beaker and 50 ml “A” and 50 ml “B”
2. 2
   その他to form 100 ml in a second beaker
3. 3
   workup.ADDITIONA Coprinus cinereus peroxidase (CiP) with an activity of 180,000 POXU/ml was added to each beaker at a concentration of 0.05 POXU/ml
4. 4
   その他The LOM beakers were sealed
5. 5
   workup.ADDITIONThe spent liquor was poured off
6. 6
   洗浄the swatches were rinsed in cold tap water for about 15 minutes
7. 7
   その他The swatches were dried at room temperature

実験手順

A 0.5 mg/ml solution of a first compound (p-phenylenediamine, “A”) and a 0.5 mg/ml solution of a second compound (1-naphthol, “B”) was prepared by dissolving the compound in the appropriate amount of 0.1 M CH3COONa, pH 5.5, buffer. A total volume of 100 ml was used in each LOM beaker. 100 ml “A” was added to one beaker and 50 ml “A” and 50 ml “B” were combined to form 100 ml in a second beaker. Swatches of the material listed above were then wetted in DI water and soaked in the precursor solutions. A Coprinus cinereus peroxidase (CiP) with an activity of 180,000 POXU/ml was added to each beaker at a concentration of 0.05 POXU/ml. Either 200 or 500 μM hydrogen peroxide was added to each LOM beaker. The LOM beakers were sealed and mounted in the LOM. After 1 hour at 42 RPM and 30° C., the LOM was stopped. The spent liquor was poured off and the swatches were rinsed in cold tap water for about 15 minutes. The swatches were dried at room temperature and CIELAB values were measured for all of the swatches using the Macbeth ColorEye 7000. The results are given in Tables 51-54.

出典