Reacción #8648

Ecuación de reacción

potassium hydroxide

maleic anhydride

potassium hydroxide

hydrogen peroxide water

→

potassium epoxysuccinate

Disolventes

water

Condiciones de reacción

Tratamiento posterior

1. 1
   Temperaturawith cooling
2. 2
   Otroat room temperature
3. 3
   TemperaturaIn this case, the flask was quickly cooled
4. 4
   Otroat 55 to 65° C
5. 5
   workup.WAITThen, the reaction mixture was kept at 65 to 60° C. for 30 minutes

Procedimiento

A 2-liter three-neck flask was charged with 280 g of maleic anhydride and 428 ml of ultrapure water for dissolution. To the aqueous solution, 500 g of 48 wt % potassium hydroxide aqueous solution was added dropwise using a dropping funnel with cooling to keep the temperature at room temperature. Then, 18.8 g of sodium tungstate was added, and subsequently 332 g of 35% hydrogen peroxide water was added dropwise. The mixture was stirred for about 30 minutes, and 115 g of 48 wt % potassium hydroxide aqueous solution was gradually added. In this case, the flask was quickly cooled to keep the reaction temperature at 55 to 65° C. Then, the reaction mixture was kept at 65 to 60° C. for 30 minutes, to obtain a potassium epoxysuccinate aqueous solution. The aqueous solution was cooled to room temperature and concentrated to 300 ml, and it was poured into 1 liter of acetone. The produced precipitate was secured by filtration, for isolation as potassium epoxysuccinate.

Fuente