Reacción #710515

Ecuación de reacción

diethylamine

tripropylammonium

diethyl dithiocarbamate

carbon disulfide

tripropylamine

→

final product

Tripropylammonium N,N-Diethyl Dithiocarbamate

Condiciones de reacción

Tratamiento posterior

1. 1
   Temperaturathe mixture is maintained at a temperature below 30° C
2. 2
   Otroto remove the excess amine
3. 3
   Otrofor the removal of low volatiles

Procedimiento

Preparation of tripropylammonium salt of diethyl dithiocarbamate is as follows: 76 grams (1 mole) carbon disulfide and 143 grams (1 mole) tripropylamine are mixed at 10° C. under nitrogen. 80.5 grams (1.1 mole) diethylamine is added slowly and drop wise to the mixture and the mixture is maintained at a temperature below 30° C. Then the mixture is heated to 50° C. for 1 hour. The solution is then stripped out under vacuum to remove the excess amine and for the removal of low volatiles to obtain final product. The acid number (normally below 30) is measured to check the acidity. The product purity (ranging between 85-95%) is measured by LC-MS and NMR.

Fuente