Reacción #635059

Ecuación de reacción

behenyl alcohol

hexamethylene diisocyanate

behenyl alcohol

TAKENATE

dibutyltin laurate

2-hydroxyethyl acrylate

dibutyltin laurate

hydroquinone monomethyl ether

→

urethane acrylate

Disolventes

toluene

toluene

Condiciones de reacción

Tratamiento posterior

1. 1
   workup.ADDITIONwas added
2. 2
   Temperaturathe mixture was maintained at 70° C. for 30 minutes
3. 3
   Temperaturathe mixture was maintained at 70° C. for 3 hours
4. 4
   Temperaturathe mixture was maintained at 70° C. for 5 hours

Procedimiento

Into 50 parts of toluene, 5.8 parts of behenyl alcohol (“NAA-422”, trade name, produced by NOF Corporation, hydroxyl value: 180) was added and the mixture was heated up to 40° C. After thorough dissolution of the behenyl alcohol, 50 parts of hexamethylene diisocyanate subjected to isocyanurate modification (“TAKENATE D-170N”) was added and the mixture was maintained at 70° C. for 30 minutes. Subsequently, 0.02 parts of dibutyltin laurate was added and the mixture was maintained at 70° C. for 3 hours. Further, 2.8 parts of 2-hydroxyethyl acrylate (Light Ester HOA), 36.1 parts of polycaprolactone-modified hydroxyethyl acrylate (“PLACCEL FA1”), 48.1 parts of polycaprolactone-modified hydroxyethyl acrylate (“PLACCEL FA5”), 0.02 parts of dibutyltin laurate and 0.02 parts of hydroquinone monomethyl ether were added and the mixture was maintained at 70° C. for 5 hours. Thereafter, 92.8 parts of toluene was added to obtain a urethane acrylate having a solid content of 50% by weight. The average number of repetitions per one molecule of the urethane acrylate relative to the number of repetitions of a caprolactone unit per one residue of an acrylate monomer is 2. Further, the maximum difference in the number of repetitions between two kinds of the urethane acrylates is 5.

Fuente