Reacción #502084

Ecuación de reacción

Betulin

Jones Reagent

→

betulonic acid

Disolventes

benzene

methanol

acetone

Condiciones de reacción

Tratamiento posterior

1. 1
   workup.ADDITIONadded dropwise at 0° C
2. 2
   Otroquench with methanol (100 mL)
3. 3
   workup.STIRRINGstir for 5 minutes
4. 4
   workup.ADDITIONadd H2O (200 mL)
5. 5
   OtroRemove organic solvent under vacuum, and then separate the precipitate
6. 6
   Filtraciónby filtration
7. 7
   LavadoWash precipitate on the
8. 8
   Filtraciónfilter with cooled water
9. 9
   Otrodry
10. 10
    Otroto obtain crude material
11. 11
    FiltraciónThe solution is then filtered through a layer of aluminum oxide
12. 12
    workup.ADDITIONthe eluate is treated with an aqueous 10% KOH solution until complete precipitation
13. 13
    OtroThe precipitate is then separated by filtration
14. 14
    Lavadowashed with 10 mL
15. 15
    Temperaturacooled benzene
16. 16
    Otrodried
17. 17
    Otroto obtain white solid
18. 18
    workup.ADDITIONthe solution is poured into 100 mL 15% aqueous HCL solution

Procedimiento

Starting off with Betulin (10 g) in acetone (300 mL), add freshly prepared Jones Reagent added dropwise at 0° C. Stir for 5 hours, quench with methanol (100 mL), then stir for 5 minutes and add H2O (200 mL). Remove organic solvent under vacuum, and then separate the precipitate by filtration. Wash precipitate on the filter with cooled water, and dry to obtain crude material. This dry material is to be dissolved in 30 mL benzene. The solution is then filtered through a layer of aluminum oxide and the eluate is treated with an aqueous 10% KOH solution until complete precipitation. The precipitate is then separated by filtration, washed with 10 mL cooled benzene, and dried to obtain white solid. The salt is dissolved in 30 mL methanol and the solution is poured into 100 mL 15% aqueous HCL solution. The betulonic acid (2.7 g) is obtained after the precipitate is filtered, washed with water, and dried.

Fuente