Reacción #2389082

Ecuación de reacción

ammonium chloride

water

cyclooctanone

Hydroxylamine-O-sulfonic acid

→

2-Azacyclononanone

Rendimiento 65.0%

Disolventes

formic acid

formic acid

Condiciones de reacción

Tratamiento posterior

1. 1
   OtroA 5 L three-neck round bottom flask was fitted with a heating mantle, an overhead mechanical stirrer, an addition funnel
2. 2
   Otroto form a white slurry
3. 3
   workup.ADDITIONAfter the addition
4. 4
   Otrothe addition funnel was replaced by a reflux condenser
5. 5
   Temperaturathe reaction was heated
6. 6
   Otroto give a brown solution
7. 7
   TemperaturaAfter the solution was cooled to room temperature
8. 8
   ExtracciónThe aqueous mixture was extracted with chloroform (3×1200 mL)
9. 9
   workup.ADDITIONwas added slowly
10. 10
    OtroThe chloroform layer was then separated
11. 11
    Secadodried over anhydrous sodium sulfate
12. 12
    Otroevaporated under reduced pressure
13. 13
    Otroto afford a
14. 14
    OtroThe oil Was placed in a 5.00 mL round bottom flask with a magnetic stirrer
15. 15
    OtroThe round bottom flask was placed in a silicon oil bath
16. 16
    Otrowas fitted with a short path vacuum distillation head
17. 17
    Otroequipped with a thermometer

Procedimiento

A 5 L three-neck round bottom flask was fitted with a heating mantle, an overhead mechanical stirrer, an addition funnel, and a thermometer. The reaction was performed under an argon atmosphere. Hydroxylamine-O-sulfonic acid (196.7 g, 1.74 moles, 1.10 equiv.) and formic acid (1 L) were charged into the round bottom flask and stirred to form a white slurry. A solution of cyclooctanone (200.0 g 1.58 moles, 1.0 equiv.) in formic acid (600 mL) was added dropwise to the white slurry via the addition funnel. After the addition, the addition funnel was replaced by a reflux condenser, and the reaction was heated to reflux (internal temperature about 105° C.) for 1 hour to give a brown solution. After the solution was cooled to room temperature, it was poured into a mixture of saturated aqueous ammonium chloride (1.5 L) and water (1.5 L). The aqueous mixture was extracted with chloroform (3×1200 mL). The combined chloroform layers were transferred into a breaker, and saturated sodium bicarbonate (2 L) was added slowly. The chloroform layer was then separated, dried over anhydrous sodium sulfate, and evaporated under reduced pressure to afford a. brown oil. The oil Was placed in a 5.00 mL round bottom flask with a magnetic stirrer. The round bottom flask was placed in a silicon oil bath and was fitted with a short path vacuum distillation head equipped with a thermometer. A Cow-type receiver was connected to three 250 mL flasks. 2-Azacyclononanone (145 g, 65%, mp 64-69° C.) was obtained by vacuum distillation (fraction with head temperature range from 80 to 120° C. at pressures between 3.0 and 3.4 mmHg).

Fuente