Reacción #1994237

Ecuación de reacción

venlafaxine HCl

→

Venlafaxine

Disolventes

water

Condiciones de reacción

Tratamiento posterior

1. 1
   workup.ADDITIONslowly adding 1,000 g of AMBERLITE™
2. 2
   workup.ADDITIONThe dispersion was mixed for 4 hours and upon completion
3. 3
   Otrobefore decanting the supernatant
4. 4
   OtroThe wet resin complex was then dried in a VWR™ convection oven
5. 5
   workup.ADDITIONEUDRAGIT™ NE-30D polymer of 467 g was then slowly added to the wet resin complex in a Hobart type mixer (Kitchen Aid)
6. 6
   Otroto form a uniform mass
7. 7
   OtroThe wet mass was dried in a 50° C
8. 8
   OtroThe dried granules were then milled through a 40 mesh screen

Procedimiento

The Venlafaxine Resin Complex was prepared by first dissolving 500 g of venlafaxine HCl in 5 L of purified water, and then slowly adding 1,000 g of AMBERLITE™ IRP-69 resin with continuous mixing. The dispersion was mixed for 4 hours and upon completion, allowed to settle before decanting the supernatant. The slurring/decanting process was repeated twice with sufficient amounts of purified water. The wet resin complex was then dried in a VWR™ convection oven maintained at 50° C. until moisture content was about 25%. EUDRAGIT™ NE-30D polymer of 467 g was then slowly added to the wet resin complex in a Hobart type mixer (Kitchen Aid) to form a uniform mass. The wet mass was dried in a 50° C. VWR™ convection oven to the moisture content around 4-6%. The dried granules were then milled through a 40 mesh screen using CO-MIL™ brand mill.

Fuente