Reaction #93690
ord-88e04718e1d44870854fe8070f599930
Reaction equation
Solvents
Conditions
Workup
- 1TemperatureAfter cooling
- 2Filtrationthe zinc is filtered off over "Celite"
- 3Washwashed with 5 l of methylene chloride
- 4workup.ADDITIONThe combined filtrates are mixed with 1.5 l of water and neutralized under agitation by the addition of solid sodium bicarbonate
- 5WashThe organic phase is then washed with water
- 6Dryingdried over sodium sulfate
- 7Concentrationconcentrated under vacuum
Procedure
A solution of 196 g of 7α-chloro-5,6β-epoxy-15β,16β-methylene-3β-pivaloyloxy-5β-androstan-17-one in 500 ml of acetic acid and 800 ml of tetrahydrofuran is combined at 70° C. with 392 g of zinc dust in two portions at an interval of 30 minutes, and stirred for one hour at this temperature. After cooling, the zinc is filtered off over "Celite" and washed with 5 l of methylene chloride. The combined filtrates are mixed with 1.5 l of water and neutralized under agitation by the addition of solid sodium bicarbonate. The organic phase is then washed with water, dried over sodium sulfate, and concentrated under vacuum. By trituration of the thus-obtained solid with ethyl acetate, 134.7 g of 5-hydroxy-15β,16β-methylene-3β-pivaloyloxy-5β-androst-6-en-17-one is produced, mp 243° C.