Reaction #50433
ord-b04e0ce1723d4b59be065f2b6d954fec
Reaction equation
Reagents
Solvents
Conditions
Workup
- 1workup.ADDITIONmixed until the pigments
- 2workup.ADDITIONwere well dispersed onto the rock surface
- 3workup.DISTILLATIONIn a separate vial, distilled water (0.9 gram) and fluorochemical surfactant (0.09 gram)
- 4workup.ADDITIONwere added together
- 5workup.ADDITIONmixed
- 6workup.ADDITIONThe two solutions were then added to the raw rock mixture in small portions
- 7Otherwas then placed in a 80° C.
- 8Otherfor 2-3 hours
- 9Otherthe polymerization
- 10OtherThe granules were removed from the oven
- 11Otherquenched with 2-3 ml of water
- 12OtherAlkalinity (5 minute)=0.5 (acid)
- 13Other15-minute=0.40 (acid)
- 14Other21 hour=0.60 (acid)
- 15Other>60 minutes
Procedure
Raw uncoated rock (100 grams, Little Rock 11-grade) was combined with TiO2 (0.75 gram) and kaolin clay (1.33 gram) into a 500 ml beaker and mixed until the pigments were well dispersed onto the rock surface. In a separate vial, distilled water (0.9 gram) and fluorochemical surfactant (0.09 gram) were added together and mixed. In the same manner, the tin-acrylate monomer (1.5 gram, 4.0×10-3 mole), methacryloxypropyltrimethoxysilane monomer (1.50 g, 6.03×10-3 mole; Petrarch, Lot #110297), and benzoyl peroxide (0.03 gram, 1.24×10-4 mole) were combined along with 1 ml of benzene. The two solutions were then added to the raw rock mixture in small portions with stirring until all of the rock had been uniformly coated. The coated material was then placed in a 80° C. oven for 2-3 hours to initiate the polymerization. The granules were removed from the oven, quenched with 2-3 ml of water, and returned to the oven to cure overnight. Alkalinity (5 minute)=0.5 (acid); 15-minute=0.40 (acid); 21 hour=0.60 (acid). Water Repellency: >60 minutes. Reverse Wettability: 100-0. Colorimetric Data: L,=64.21, a,=-1.57, b,=-2.11. Stain: 0.23. Adhesion 7-Day Wet (based on average of seven samples)=0.40 gram.