Reaction #1755448

Reaction equation

potassium hydroxide

2,2,3,3-tetrafluoropropan-1-ol

1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulfonyl fluoride

potassium hydroxide

→

2,2,3,3-tetrafluoropropyl 1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulfonate

Solvents

water

Conditions

Workup

1. 1
   OtherThe flask was equipped with a magnetic stirrer, cold water condenser
2. 2
   Otherdid not exceed 35° C
3. 3
   FiltrationPrecipitated salts were then filtered from the mixture
4. 4
   Otherthe lower liquid fluorochemical product phase was separated from the upper aqueous phase
5. 5
   Otherwere removed from the liquid fluorochemical product phase by atmospheric distillation

Procedure

2,2,3,3-tetrafluoropropan-1-ol (202 g, 1.52 mol, obtained from Sinochem Corp.), 1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulfonyl fluoride (465 g, 1.52 mol, obtained from 3M Company) and water (500 g) were combined in a 3-liter, 3-necked round bottom flask. The flask was equipped with a magnetic stirrer, cold water condenser, thermocouple and an addition funnel. Aqueous potassium hydroxide (45 percent by weight, 211.5 g, 1.7 mol, obtained from Aldrich Chemical Co., Milwaukee, Wis.) was added dropwise via the addition funnel at such a rate that the temperature did not exceed 35° C. Once the addition of the potassium hydroxide was complete, the mixture was stirred for 16 hours at room temperature. Precipitated salts were then filtered from the mixture and the lower liquid fluorochemical product phase was separated from the upper aqueous phase. Unreacted 2,2,3,3-tetrafluoropropan-1-ol and 1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulfonyl fluoride were removed from the liquid fluorochemical product phase by atmospheric distillation.

Source