Reaction #1583855
ord-b6caf59d71b147d5951263b2a4600316
Reaction equation
Reactants
Reagents
Solvents
Conditions
Workup
- 1workup.ADDITIONslowly adding 1,589 g of AMBERLITE™
- 2workup.ADDITIONThe dispersion was mixed for 4 hours and upon completion
- 3Otherbefore decanting the supernatant
- 4FiltrationThe slurry was filtered
- 5Washrinsed 3 times with sufficient amounts of purified water
- 6OtherThe wet resin complex was then dried in a VWR™ convection oven
- 7workup.ADDITIONKOLLICOAT™ SR-30D polymer (668 g) was then slowly added to the wet resin complex in a Hobart type mixer (Kitchen Aid)
- 8Otherto form a uniform mass
- 9OtherThe wet mass was again dried at 50° C. in a VWR™ convection oven to the moisture content around 30%
- 10OtherThe semi-dried granules were then milled through a 40 mesh screen
- 11Othercontinued drying under 50° C. until the moisture content
- 12OtherThe dried granules were then milled through a 40 mesh screen
Procedure
The Pseudoephedrine Resin Complex was prepared by first dissolving 857 g of pseudoephedrine HCl in 5 L of purified water, and then slowly adding 1,589 g of AMBERLITE™ IRP-69 resin with continuous mixing. The dispersion was mixed for 4 hours and upon completion, allowed to settle before decanting the supernatant. The slurry was filtered and rinsed 3 times with sufficient amounts of purified water. The wet resin complex was then dried in a VWR™ convection oven maintained at 50° C. until moisture content was about 25%. KOLLICOAT™ SR-30D polymer (668 g) was then slowly added to the wet resin complex in a Hobart type mixer (Kitchen Aid) to form a uniform mass. The wet mass was again dried at 50° C. in a VWR™ convection oven to the moisture content around 30%. The semi-dried granules were then milled through a 40 mesh screen using CO-MIL™ brand mill and continued drying under 50° C. until the moisture content was between 4-6%. The dried granules were then milled through a 40 mesh screen using CO-MIL™ brand mill.