Reaktion #53762

Reaktionsgleichung

1,2-Dibromoethane

Methyl (3R)-3-[(2-bromo-1-oxooctyl)oxy]-tetradecanoate

magnesium

→

(6R)-3-hexyl-4-hydroxy-6-undecyl-5,6-dihydropyran-2-one

Ausbeute 45.0%

Lösungsmittel

THF

THF

Reaktionsbedingungen

Aufarbeitung

1. 1
   workup.ADDITIONwas added
2. 2
   Temperaturat reflux over about 1 h
3. 3
   SonstigeThe resulting yellow solution was decanted away from the metal into a 1-L, round-bottomed flask
4. 4
   WaschenThe residual Mg metal was rinsed twice with 60 mL of THF
5. 5
   EinengenThe combined THF solution was concentrated on a rotary evaporator
6. 6
   workup.ADDITIONadded to a mixture of 500 mL of water, 200 mL of ice and 98 mL of 10% HCl in a separatory funnel
7. 7
   SonstigeThe aqueous layer was removed
8. 8
   Waschenthe organic layer washed once with 200 mL of saturated sodium chloride
9. 9
   Trocknendried (NaSO4)
10. 10
    Filtrationfiltered
11. 11
    Sonstigethe solvent removed on a rotary evaporator
12. 12
    Temperaturcooled to 0° C.
13. 13
    Filtrationfiltered
14. 14
    Waschenrinsed twice with 50 mL of cold hexane
15. 15
    SonstigeThe isolated white solid was dried in an oven at 40° C. under reduced pressure (10 mm Hg) overnight

Vorschrift

To a 1-L, 3-necked, round-bottomed flask fitted with a Claisen adapter with N2 inlet, a West condenser and a thermocouple-J-KEM controller and a rubber septum was added 13.9 g (0.572 g-atom, 3.2 equiv.) of magnesium (from Chromasco) was added. A small flake of 12 (about 45 mg) was added and the mixture was heated to about 80° C. 1,2-Dibromoethane (3.4 g, 18 mmol) and 350 mL of THF were added to the hot Mg/I2 mixture to activate the metal surface. Methyl (3R)-3-[(2-bromo-1-oxooctyl)oxy]-tetradecanoate (82.9 g, 179 mmol) from Example 2,1,2-dibromoethane (33.6 g, 179 mmol) and 400 mL of THF were added to the addition funnel. This mixture was slowly added to the Mg/THF mixture at reflux over about 1 h. The reaction mixture was stirred overnight (14 h) at about 60° C. The resulting yellow solution was decanted away from the metal into a 1-L, round-bottomed flask. The residual Mg metal was rinsed twice with 60 mL of THF. The combined THF solution was concentrated on a rotary evaporator. The syrupy mixture was taken up in 1750 mL of methylene chloride and added to a mixture of 500 mL of water, 200 mL of ice and 98 mL of 10% HCl in a separatory funnel. The aqueous layer was removed, the organic layer washed once with 200 mL of saturated sodium chloride, dried (NaSO4), filtered, and the solvent removed on a rotary evaporator. The crude white solid (66.7 g) was slurried in 100 mL of hexane, cooled to 0° C., filtered, and rinsed twice with 50 mL of cold hexane. The isolated white solid was dried in an oven at 40° C. under reduced pressure (10 mm Hg) overnight resulting in 28.4 g of (6R)-3-hexyl-4-hydroxy-6-undecyl-5,6-dihydropyran-2-one (45-50% yield based on methyl (R)-3-hydroxytetradecanoate).

Quelle