Reaktion #3769

Reaktionsgleichung

acrylonitrile

acrylonitrile

2-methylaminoethanol

acrylonitrile

acrylonitrile

→

2-cyanoethyl-2-hydroxyethylmethylamine

Lösungsmittel

water

Reaktionsbedingungen

Aufarbeitung

1. 1
   Sonstigeequipped with a stirrer, a condenser, an addition funnel
2. 2
   workup.ADDITIONwas charged to the addition funnel (875.2 ml)
3. 3
   Temperaturwas air-cooled
4. 4
   Sonstigewas about 81° C
5. 5
   Sonstigewere held at 75° C. while agitation
6. 6
   Temperaturto cool to room temperature
7. 7
   TemperaturThe flask was then heated to 80° C. under 5 mm Hg vacuum
8. 8
   Sonstigeto remove residual water and acrylonitrile
9. 9
   Sonstigereaction product

Vorschrift

1000.0 grams (13.31 moles) of 2-methylaminoethanol was placed in a 3000 milliliter 3-neck flask equipped with a stirrer, a condenser, an addition funnel, and a thermometer. 50.0 grams of distilled water was charged to the flask, and 705.4 grams (13.31 moles) of acrylonitrile was charged to the addition funnel (875.2 ml). The acrylonitrile was added dropwise slowly over 55 minutes, during which time the flask was air-cooled and the contents of the flask increased in temperature to about 75° C. The maximum temperature of the flask contents during the addition of the acrylonitrile was about 81° C. After the addition of acrylonitrile was completed, the flask contents were held at 75° C. while agitation was continued for another 2.75 hours. The contents were then allowed to cool to room temperature. The flask was then heated to 80° C. under 5 mm Hg vacuum, to remove residual water and acrylonitrile. The flask contents then comprised 1697.8 grams of product; GC analysis showed that 96.4% of this was the desired reaction product.

Quelle