Reaktion #1755448

Reaktionsgleichung

potassium hydroxide

2,2,3,3-tetrafluoropropan-1-ol

1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulfonyl fluoride

potassium hydroxide

→

2,2,3,3-tetrafluoropropyl 1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulfonate

Lösungsmittel

water

Reaktionsbedingungen

Aufarbeitung

1. 1
   SonstigeThe flask was equipped with a magnetic stirrer, cold water condenser
2. 2
   Sonstigedid not exceed 35° C
3. 3
   FiltrationPrecipitated salts were then filtered from the mixture
4. 4
   Sonstigethe lower liquid fluorochemical product phase was separated from the upper aqueous phase
5. 5
   Sonstigewere removed from the liquid fluorochemical product phase by atmospheric distillation

Vorschrift

2,2,3,3-tetrafluoropropan-1-ol (202 g, 1.52 mol, obtained from Sinochem Corp.), 1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulfonyl fluoride (465 g, 1.52 mol, obtained from 3M Company) and water (500 g) were combined in a 3-liter, 3-necked round bottom flask. The flask was equipped with a magnetic stirrer, cold water condenser, thermocouple and an addition funnel. Aqueous potassium hydroxide (45 percent by weight, 211.5 g, 1.7 mol, obtained from Aldrich Chemical Co., Milwaukee, Wis.) was added dropwise via the addition funnel at such a rate that the temperature did not exceed 35° C. Once the addition of the potassium hydroxide was complete, the mixture was stirred for 16 hours at room temperature. Precipitated salts were then filtered from the mixture and the lower liquid fluorochemical product phase was separated from the upper aqueous phase. Unreacted 2,2,3,3-tetrafluoropropan-1-ol and 1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulfonyl fluoride were removed from the liquid fluorochemical product phase by atmospheric distillation.

Quelle