Reaktion #1012282
ord-a6a75a884f7d4651ae7cafdb0251339e
Lösungsmittel
Reaktionsbedingungen
Aufarbeitung
- 1Sonstigeobtaining a mixture
- 2SonstigeThe reaction vessel was sealed
- 3workup.STIRRINGthe mixture was stirred at an internal temperature of 150° C.
- 4Sonstigean internal pressure of 0.8 MPa for 7 hours to obtain a reaction mixture
- 5SonstigeThe obtained reaction mixture
- 6Temperaturwas cooled
- 7Filtrationfiltered
- 8WaschenThe obtained solid was washed with 20 parts by weight of 2-propanol
- 9SonstigeThe washing liquid recovered
- 10Waschenafter washing
- 11Sonstigethe filtrate obtained by filtration
- 12EinengenThe combined mixture was concentrated under reduced pressure
Vorschrift
Into a reaction vessel were charged 6.00 parts by weight of (3R)-1,1,3-trimethyl-4-aminoindane (optical purity of 96.5% ee), 0.81 parts by weight of 5% palladium-carbon (STD-type, manufactured by N. E. Chemcat Corporation), and 12 parts by weight of 2-propanol, thereby obtaining a mixture. The reaction vessel was sealed and the gas inside the reaction vessel was replaced with nitrogen. While stirring the mixture at room temperature, to the reaction vessel was charged hydrogen until the internal pressure of hydrogen in the reaction vessel reached 0.5 MPa. After 15 minutes, the gas in the reaction vessel was replaced with nitrogen, and the mixture was stirred at an internal temperature of 150° C. and an internal pressure of 0.8 MPa for 7 hours to obtain a reaction mixture. The obtained reaction mixture was cooled and filtered. The obtained solid was washed with 20 parts by weight of 2-propanol. The washing liquid recovered after washing and the filtrate obtained by filtration were combined. The combined mixture was concentrated under reduced pressure to obtain 5.82 parts by weight of 1,1,3-trimethyl-4-aminoindane. The obtained 1,1,3-trimethyl-4-aminoindane had an optical purity of 1.2% ee and a recovery rate of 97.0%.