تفاعل #8936
ord-40de2e1908344d3fa08871d4f95f32e6
معادلة التفاعل
المذيبات
ظروف التفاعل
المعالجة
- 1workup.ADDITIONwas added to the flask
- 2درجة الحرارةthe resulting slurry was cooled below 15° C. in an ice bath
- 3درجة الحرارةmaintained at 0–5° C. during the addition
- 4workup.STIRRINGAfter stirring at 0–5° C. for 30 min.
- 5أخرىReaction
- 6workup.WAITwas left
- 7workup.STIRRINGstirring for 30 min
- 8استخلاصThe reaction mixture was extracted with diethyl ether (3×)
- 9تركيزThe organic extracts were concentrated to approximately one-fourth the original volume
- 10استخلاصextracted with 25 mL 1N sodium hydroxide solution
- 11أخرىThe layers were separated
- 12استخلاصThe acidified aqueous layer was then extracted with diethyl ether (3×)
- 13تجفيفdried (MgSO4)
- 14تركيزconcentrated
- 15أخرىto yield a reddish-colored oil
- 16أخرىPurification by flash chromatography on silica gel using a gradient of 0–7% methanol/methylene chloride
الإجراء التجريبي
A one-necked 100 mL round-bottomed flask (magnetic stirring) was charged with 1.0 gram (6.6 mM) 3-amino-2-methylbenzoic acid. A warm mixture of 2.3 mL conc. sulfuric acid in 4.3 mL water was added to the flask, the resulting slurry was cooled below 15° C. in an ice bath, and 6.6 grams of ice was added. The reaction mixture was treated via subsurface addition with a solution of 0.6 gram (8.6 mM) sodium nitrite in 6.6 mL ice water with the reaction temperature maintained at 0–5° C. during the addition. After stirring at 0–5° C. for 30 min., a few crystals of urea were added to decompose the excess nitrite. The reaction mixture was then poured into a room temperature solution of 23.8 grams (102.3 mM) copper (II) nitrate hemipentahydrate in 200 mL water. With vigorous stirring, the reaction mixture was treated with 0.9 gram (6.0 mM) copper (I) oxide. The reaction mixture foamed and changed from turquoise blue to dark green in color. Reaction was left stirring for 30 min. The reaction mixture was extracted with diethyl ether (3×), and the organic extracts were combined. The organic extracts were concentrated to approximately one-fourth the original volume, then extracted with 25 mL 1N sodium hydroxide solution. The layers were separated, and the dark-red aqueous layer was acidified to pH=2 using 1N hydrochloric acid solution. The acidified aqueous layer was then extracted with diethyl ether (3×), and the ether extracts were combined, dried (MgSO4), and concentrated to yield a reddish-colored oil. Purification by flash chromatography on silica gel using a gradient of 0–7% methanol/methylene chloride afforded 0.39 grams (36%) of a yellow solid.