تفاعل #64710
ord-49023b0fd6f441d9ad6176cf2e5e5e50
معادلة التفاعل
المتفاعلات
الكواشف
ظروف التفاعل
المعالجة
- 1workup.ADDITIONwas added to dropwise to the stirred solution over a thirty minute period so as
- 2درجة الحرارةto maintain the reaction temperature between -9° and -11° C
- 3أخرىAfter two hours of post reaction between the -9° to -11° C. temperature
- 4أخرىThe oil solution was separated
- 5غسيلthen washed with a second 500 milliliter portion of iced deionized water
- 6أخرىAfter separation
- 7workup.ADDITIONthe recovered oil solution was added to a 2 liter beaker along with 250 milliliters of ethanol
- 8workup.STIRRINGstirred
- 9أخرىto provide a solution
- 10درجة الحرارةheating
- 11درجة الحرارةAs the temperature of the mixture increased
- 12درجة الحرارةheating
- 13أخرىreached 70° C.
- 14أخرىa massive precipitation of white crystalline plates
- 15أخرىThe oil layer was recovered by decantation of the water layer and 250 milliliters of ethanol
- 16workup.ADDITIONwas added
- 17workup.ADDITIONDeionized water was again added to the stirred solution
- 18درجة الحرارةas heating
- 19أخرىreached 90° C.
- 20أخرىa massive precipitation of white crystalline plates
- 21workup.STIRRINGAt this time, stirring
- 22درجة الحرارةboth chilled to 5° C.
- 23ترشيحThe crystalline product was recovered by filtration
- 24workup.STIRRINGthen stirred
- 25درجة الحرارةwith heating to 90° C
- 26درجة الحرارةAfter cooling to 5° C.
- 27ترشيحthe crystalline product was recovered by filtration
- 28أخرىthen dried in a vacuum oven at 100° C.
الإجراء التجريبي
Phenol (376.44 grams, 4.0 moles), chloroacetone (205.62 grams, 2.0 moles as chloroacetone) and methylene chloride (300 grams) were added to a reactor and cooled to -10° C. with stirring. The chloroacetone used was a technical grade containing 90% chloroacetone, 2.5% acetone, 6.5% 1,1-dichloroacetone and 1.0% 1,3-dichloroacetone, Concentrated sulfuric acid (196.16 grams, 2.0 mole) was added to dropwise to the stirred solution over a thirty minute period so as to maintain the reaction temperature between -9° and -11° C. After two hours of post reaction between the -9° to -11° C. temperature, the viscous orange oil solution was mixed with 500 milliliters of iced deionized water. The oil solution was separated then washed with a second 500 milliliter portion of iced deionized water. After separation, the recovered oil solution was added to a 2 liter beaker along with 250 milliliters of ethanol and stirred to provide a solution. Deionized water (250 milliliters) was added to the stirred solution and heating commenced. As the temperature of the mixture increased, the stirred mixture began to clear. Each time clearing was observed, sufficient deionized water was added to induce cloudiness, followed by continuation of the mixing and heating. Once the temperature reached 70° C., a massive precipitation of white crystalline plates occurred and was followed by immediate coalesence of the precipitated product to an oil. The oil layer was recovered by decantation of the water layer and 250 milliliters of ethanol was added. Deionized water was again added to the stirred solution as heating commenced, in an amount sufficient to induce cloudiness each time clearing was observed. Once the temperature reached 90° C., a massive precipitation of white crystalline plates again occurred. At this time, stirring was stopped and the crystalline slurry, as well as the decanted water layer were both chilled to 5° C. and held therein for 12 hours. The crystalline product was recovered by filtration, combined with 250 milliliters of deionized water then stirred with heating to 90° C. After cooling to 5° C., the crystalline product was recovered by filtration then dried in a vacuum oven at 100° C. and 5 mm Hg to a constant weight of 226.7 grams. Proton magnetic resonance spectroscopy and infrared spectrophotometric analysis confirmed the product structure.