تفاعل #56350

معادلة التفاعل

ethyl acrylate

boron trifluoride

allyl acrylate

azobis(isobutyronitrile)

ethylene

ethylene

maleic anhydride

→

Ethylene/Ethyl Acrylate Allyl Acrylate Maleic Anhydride

المذيبات

methylene chloride

acetone

ظروف التفاعل

المعالجة

1. 1
   workup.ADDITIONwas charged under nitrogen with 4000 ml
2. 2
   أخرىIt was then sealed
3. 3
   أخرىThe subsequent copolymerization at 25° C.
4. 4
   أخرىabout two hours
5. 5
   أخرىThe reaction was quenched by addition of one liter of diethyl ether
6. 6
   أخرىVolatiles were removed by steam-stripping in a well-ventilated hood
7. 7
   أخرىThe terpolymer thereby obtained
8. 8
   أخرىprecipitated in water in a blender
9. 9
   أخرىoven-dried

الإجراء التجريبي

A 7.57-liter stirred autoclave was charged under nitrogen with 4000 ml. of methylene chloride, 400 grams of ethyl acrylate, 20 grams of maleic anhydride, 1.2 grams of allyl acrylate, and 1.0 gram of azobis(isobutyronitrile). It was then sealed, charged with 300 grams of boron trifluoride, and pressured to 21 kg./sq. cm. with ethylene. The subsequent copolymerization at 25° C. was continued until pressure measurement indicated that ethylene uptake had ceased (about two hours later). The reaction was quenched by addition of one liter of diethyl ether. Volatiles were removed by steam-stripping in a well-ventilated hood. The terpolymer thereby obtained was dissolved in acetone, precipitated in water in a blender, and oven-dried. Yield: 415 grams.

المصدر