تفاعل #551616

ord-3e1878949f9a41fa8a26303ab7d07ff1

المذيبات

ظروف التفاعل

الظروف التفصيلية
See reaction.notes.procedure_details.

المعالجة

  1. 1
    ترشيحThe mixture filtered
  2. 2
    أخرىto remove a small amount of precipitate
  3. 3
    workup.ADDITIONThe filtrate was diluted with 200 ml of ice water
  4. 4
    استخلاصextracted with 3×100 ml of benzene
  5. 5
    غسيلthe combined extracts washed with water
  6. 6
    تجفيفdried over magnesium sulfate
  7. 7
    تركيزconcentrated in vacuo
  8. 8
    أخرىto give a pale brown oil, 8.24 g
  9. 9
    درجة الحرارةheated
  10. 10
    workup.DISSOLUTIONuntil dissolved
  11. 11
    أخرىA fine amorphous gel was removed by filtration
  12. 12
    workup.ADDITIONthe filtrate diluted with isopropyl ether until cloudy
  13. 13
    أخرىto precipitate overnight
  14. 14
    أخرىAfter 2 weeks the oil which separated from the acetone/isopropyl ether
  15. 15
    أخرىto crystallize
  16. 16
    أخرىThe solvents were removed by decantation
  17. 17
    workup.ADDITIONThe free base in methylene chloride was treated with 200 g of florisil
  18. 18
    workup.ADDITIONdiluted with enough methylene chloride
  19. 19
    أخرىto give a stirrable slurry
  20. 20
    ترشيحAfter 30 minutes the slurry was filtered
  21. 21
    غسيلthe florisil washed with 2 volumes of methylene chloride
  22. 22
    غسيلThe column was washed with an additional 500 ml of methanol
  23. 23
    تركيزConcentration in vacuo of the combined methanol effluents

الإجراء التجريبي

A stirred solution of 7 g (0.024 mole) of 3-(3,5-dichlorophenoxy)-1-pyrrolidinecarbonyl chloride in 70 ml of tetrahydrofuran was treated with 7 g (0.05 mole) of N,N,N'-triethylethylenediamine (slight exothermic) and stirred at ambient temperature overnight. The mixture filtered to remove a small amount of precipitate. The filtrate was diluted with 200 ml of ice water, extracted with 3×100 ml of benzene and the combined extracts washed with water, dried over magnesium sulfate and concentrated in vacuo to give a pale brown oil, 8.24 g. The oil was dissolved in acetone, treated with 1.9 g of oxalic acid and heated until dissolved. A fine amorphous gel was removed by filtration and the filtrate diluted with isopropyl ether until cloudy. The salt was allowed to precipitate overnight. After 2 weeks the oil which separated from the acetone/isopropyl ether failed to crystallize. The solvents were removed by decantation and the residual oil converted back to the free base. The free base in methylene chloride was treated with 200 g of florisil and diluted with enough methylene chloride to give a stirrable slurry. After 30 minutes the slurry was filtered and the florisil washed with 2 volumes of methylene chloride. The florisil was suspended in 500 ml of methanol and transferred to a column. The column was washed with an additional 500 ml of methanol. Concentration in vacuo of the combined methanol effluents gave 7.6 g of dark oil which was chromatographed on a 100 g alumina column by eluting with a 0-5% methanol/acetonitrile gradient. The first 2 fractions were discarded and the remainder combined and concentrated to an oil (5.2 g). The oil was dissolved in ethyl ether, filtered to remove traces of alumina, concentrated in vacuo and excess solvent removed by pumping under high vacuum at 55° C. for 18 hours.

المصدر

DOI: 10.6084/m9.figshare.5104873.v1براءة الاختراع: US04547514uspto-grants-1985_10